PLAYBACK MENU fDPOF SET FRAME
1 | 0103 | 02 |
You can only specify one print per frame (image) in the DPOF settings.
1Press the “MENU/OK” button to display the menu.
2Use “d” or “c” to select “fDPOF”.
3With “EXECUTE” selected, press the “MENU/ OK” button.
●! The DPOF menu is not displayed when a movie or voice file is selected.
●! You cannot specify printing for more than one print
66per frame.
2 | 01 |
| 02 |
1If you select a frame for which DPOF settings have already been specified, the “∑” message appears.
2Pressing the “MENU/OK” button erases all the DPOF settings already specified. You must then specify the DPOF settings again.
●! Press the “BACK” button to leave the previous settings unchanged.
●! You can check the previous settings by playing back the images (➡P.30).
3 | 01 | 02 |
1 Use “d” or “c” to display the frame for which you want to specify DPOF settings.
2 Use “a ([)” or “b (])” to select the setting for the frame to be printed. You can check the frames for which the date/time has been set from the “k” icon that appears when frames with the setting are redisplayed.
●! DPOF settings cannot be specified for movies.
●! Note that the “k” icon is not displayed during playback.
●! “TOTAL” shows the total number of frames for which prints have been ordered.
To specify more DPOF settings, repeat steps 01and 02.
4 |
When you have finished specifying the DPOF settings, always press the “MENU/OK” button to confirm the settings.
If you press the “BACK” button, no DPOF 4 settings are specified.
●! You can only specify one print per frame in the DPOF settings. Note also that you can specify prints for up to 999 frames on the same SmartMedia.
PressingTo specifytheadditional“MENU/OKDPOF” buttonsettings,confirmsrepeatall the settingssteps 01.andNote02 thatand selectyou cannot“SET” forchangethe framesthe
settingsto be printedlater.(➡P.66).67
