REMOVING THE SmartMedia™
OPENING/CLOSING THE LENS COVER
SWITCHING ON AND OFF
1 | 01 | 02 |
|
| 03 |
1Check that the indicator in the viewfinder lamp is green (➡ P.25).
2Then switch the camera off.
3Always ensure that the battery cover is facing upwards when you open it.
●! See P.17 for information on switching the camera on
2
Grip the SmartMedia and pull it out, taking care that the batteries do not fall out of the camera.
●! To protect the SmartMedia, always store it in the special
◆ Printing Images and Downloading |
Open and close the lens cover by sliding it down and up diagonally.
●! Slide the lens cover until it locks into place.
●! Take care not to touch the lens directly while the lens cover is open.
| 01 |
|
02 | 03 | 1 |
1To turn the camera on or off, slide the Power switch to “$”.
2Sliding the Power switch to “%” allows you to use the camera as a music player.
3When you do not want to listen to music, slide the Power switch to the middle position.
●! Note that you cannot use the FinePix30i as a camera when the Power switch is set to “%”.
and off.
Never open the battery cover while the camera is still switched on as this could corrupt the image files on the SmartMedia or damage the
16SmartMedia itself.
Images to a PC ◆ |
h See P.64, 90 for information on printing images.
h See
◆ Auto Power Off function ◆
If the camera is not used in any way for roughly 2 minutes, the Auto Power Off function always switches the camera off to reduce power consumption. You cannot disable this function. However, the Auto Power Off function does not operate in sound sync. mode (➡P.43), audio recording (➡P.51) or playback of audio recordings (➡P.58), or when the camera is connected via the USB interface (➡P.83).
17
