The Vertical Battery Grip

Attaching the VG-XT1

The VG-XT1 attaches as shown below.

1 Remove the vertical battery grip connector cover from the camera and place it in the grip connector cover compartment.

2 Align the connectors on the grip with the matching connectors on the camera.

3Rotate the lock screw knob to tighten the lock screw.

AC Power Adapters

The grip can be used with an optional AC-9V AC power adapter and CP-W126 DC coupler.

Inserting a Battery

Insert a battery as shown below.

1 Unlatch and open the battery -chamber cover.

2 Insert the battery.

3 Close and latch the battery- chamber cover.

QThe battery in the grip is used before the battery in the camera. The camera automatically switches to the camera battery when the battery in the grip is exhausted. Movie recording and bulb photography will end when the camera switches batteries. When the battery in the grip is exhausted, remove and charge the battery or replace it with a fully-charged spare battery.

RThe camera shows the levels of both batteries, with the camera

battery level listed first.

114