FujiFilm 16270877, BL01758-200 focus, (P30), Problem, Solution, selected, same size, available, not available, is not available, the obstructions, Wrong subject is, shooting mode (P30)

Problems and Solutions

	Problem		Solution
	The camera does not	•	The subject is close to the camera: Select macro mode (P50).
		•	The subject is far away from the camera: Cancel macro mode (P50).
	focus.
		•	The subject is not suited to autofocus: Use focus lock (P47).
	Pictures are not the	If Sis selected for OIMAGE SIZE in Rmode, the camera will optimize not only sensi-
		tivity and other settings, but also image size. To record all pictures at the same size, choose another
	same size.
		shooting mode or select another option for OIMAGE SIZE (P101).
	Macro mode is not	Choose a different shooting mode (P30).
	available.
	Intelligent Face Detection	Intelligent Face Detection is not available in the current shooting mode: Choose a differ-
	is not available.	ent shooting mode (P30).
		•	The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove
			the obstructions.
		•	The subject’s face occupies only a small area of the frame: Change the composition so that
	No face is detected.		the subject’s face occupies a larger area of the frame (P47).
		•	The subject’s head is tilted or horizontal: Ask the subject to hold their head straight.
		•	The camera is tilted: Keep the camera level (P26).
		•	The subject’s face is poorly lit: Shoot in bright light.
	Wrong subject is	The selected subject is closer to the center of the frame than the main subject. Recompose the
	selected.	picture or turn face detection off and frame the picture using focus lock (P47).
		•	The flash is not available in the current shooting mode: Choose a different shooting mode
			(P30).
	The fl ash does not fi re.	•	The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P13).
		•	The camera is in continuous mode: Select Bfor RCONTINUOUS (P57).
		•	The camera is in silent mode: Turn silent mode off (P124).
		•	The flash is not raised: Raise the fl ash (P51).
	Some fl ash modes are	•	The desired flash mode is not available in the current shooting mode: Choose a different
			shooting mode (P30).
	not available.
		•	The camera is in silent mode: Turn silent mode off (P124).
138			Troubleshooting