Problems and Solutions

 

 

 

Problem

 

Solution

 

The fl ash does not fully

The subject is not in range of the flash: Position the subject in range of the fl ash (P149).

 

The flash window is obstructed: Hold the camera correctly (P26).

light the subject.

Fast shutter speed selected: Choose a slower shutter speed (P42, 44).

 

 

The lens is dirty: Clean the lens (P135).

 

 

The lens is blocked: Keep objects away from the lens (P26).

Pictures are blurred.

sis displayed during shooting and the focus frame is displayed in red: Check focus

 

 

before shooting (P142).

 

kis displayed during shooting: Use the fl ash or a tripod (P52).

 

A slow shutter speed is selected at high temperatures: This is normal and does not indi-

 

Pictures are mottled.

 

cated a malfunction.

The camera has been used continuously at high temperatures or a temperature warn-

 

 

 

ing is displayed: Turn the camera off and wait for it to cool down.

 

 

Power was interrupted during shooting. Before connecting the AC power adapter or DC coupler,

Pictures are not recorded.

turn the camera off. Leaving the camera on can result in corrupted fi les or damage to the memory

 

card or internal memory.

Sounds made by the

uCONTINUOUS is selected for WMOVIE SET-UP > MOVIE AF MODE:

 

 

Select a different AF mode (P110).

camera are recorded with

 

Zoom was adjusted during shooting: Do not adjust zoom during shooting.

movies.

Intelligent Face Detection is on: Turn Intelligent Face Detection off (P66).

 

 

Playback

Problem

Solution

Pictures are grainy.

The pictures were taken with a different make or model of camera.

Playback zoom

The picture has been saved at a, or is from another make or model of camera (P72).

unavailable.

 

Troubleshooting

139