Adjusting Color Balance (TWHITE BALANCE)

ZSetting the preset white balance using WB and the

EIf the exposure is measured correctly,

blinks in

command dials

the shutter speed display in the control panel, and

AWhile pressing WB, rotate the main-command dial until

blinks in the shutter speed display in the viewfinder for

PRE (preset) is displayed in the control panel.

about 3 seconds. Then preset recording mode ends.

BWhile pressing WB, rotate the sub-command dial to

 

 

select a preset custom number (P-1 to P-5).

 

 

 

CRemove your finger from WB and press

ZWhen the exposure is not measured correctly

 

again for more than 1.5 seconds.

When the exposure is not measured correctly,

 

Preset recording mode is activated and

blinks in the shutter speed display in the control panel

 

flashes in the viewfinder and the

(exposure display in the viewfinder) for about 3 seconds,

 

then returns to the C step.

 

control panel. Also, the preset custom

 

 

 

 

number and PRE flash in the control panel.

MEMO

 

 

 

 

• The preset white balance cannot be set if:

 

 

-

the memory card is full.

 

 

- the memory card has an error.

 

 

-

is flashing.

 

 

- the frame number has reached 999-9999.

 

 

-

is set in exposure mode .

 

DHold up a sheet of white paper, reflectivity

• Setting the preset white balance again is recommended

 

when the ISO sensitivity is changed.

 

of 18% grey card, etc., under the target

 

 

 

light source. Be sure the white balance

 

 

 

reference object fills the 8-mm (0.31-in.)

 

 

 

reference circle for center-weighted

 

 

 

metering in the viewfinder (➝p.19). Then

 

 

100

press the shutter button.