Page
For customers in the U.S.A
FCC Statement
For customers in Canada
Be sure to read this page before using the software
End User License Agreement
Page
Disposal of used Electrical & Electronic Equipment
product
In Countries outside the EU:
Setting the camera to playback mode
Single-frameplayback
Multi-frameplayback
Using the erase button
Focus mode
Changing the Image Quality Setting
Changing the Image Size Setting
Adjusting Color Balance
(TWHITE BALANCE)
CHOOSE COLOR TEMP
MAINTENANCE
Cleaning the CCD
TIME
Warning messages displayed in the control
panel and viewfinder
ZTest Shots Prior to Photography
ZNotes on Copyright
ZHandling Your Digital Camera
ZLiquid Crystal
•If liquid crystal gets into your eye
ZNotes on Electrical Interference
ZExplanation of Color Television System
ZExif Print (Exif ver. 2.2)
This mark denotes issues that may affect the
camera’s operation
CHECK
This mark denotes points to notice in the camera’s operation
MEMO
Page
Page
Page
Page
Page
ZControl panel
ZThe LCD Illuminator
ZViewfinder
AFraming grid
B8-mm (0.31-in.)reference circle for center-weightedmetering (p.68)
C“No memory card” warning* (p.213) DBattery indicator* (p.33)
HMetering (p.68)
ZLCD Monitor
Photo information
Highlights can be displayed
separately for each of the
following: histogram for
ZLarge-capacitymemory cards
ZCamera off display
About advanced focusing screen display
Page
Attaching the Strap and Lens
Mounting index
•Always change the lens in an area free of dirt and dust
•When attaching the lens, take care not to press the lens release button
Detaching lenses
ZLens compatibility
Types of CPU lenses and other usable lenses/accessories
Focus mode
P S
A M
Page
ZG-typeNikkor and other CPU Nikkor lens
ZWhen a non-CPUlens is attached
ZNikkor lenses/accessories that cannot be attached to the FinePix S5 Pro
2 Press the bottom of the cover until it clicks into place
ZCompatible battery
Rechargeable Battery NP-150
Indicator
Terminals
ZRechargeable battery NP-150
Page
Set the power switch to OFF to turn the camera off (➝p.36)
Open the battery cover
Removing the battery
Do not apply excessive force to the battery cover
3 Load the battery as shown below
Page
Photographs are stored on CompactFlash/Microdrive (available separately)
ZAvailable CompactFlash/Microdrive
The following cards have been tested and approved for use with the S5 Pro:
• SanDisk
SDCFH
ATurn the camera on (➝p.36)
BPress and MODE simultaneously for about 2 seconds
blinks in the control panel and viewfinder
CPress and MODE again
DAfter formatting is completed, the control panel shows
1 [ ] screen appears when turning the camera on
APress n, o, p, or q to select the language
BPress MENU/OK to confirm the setting
2 Set the date and time
3 Change the date format
Date format
Turning On and Off
1 Open the [SET UP] menu
2 Display the [DATE/TIME] screen
Focus brackets
2 Display the [] screen
Shutter button (p.49)
Power switch (p.36)/Illuminator switch (p.18)
Accessory shoe (p.91)
Flash pop-upbutton (p.79)
Focus-modeselector (p.47, 54)
Release mode dial unlock button (p.66)
94)
Release mode dial (p.66)
ISO (ISO sensitivity) button (p.92)
Camera the Using
Sub-commanddial
Depth-of-fieldpreview button (p.65)
FUNC. Button (p.168)
10-pinremote terminal
Lens release button (p.24)
BKT (bracketing) button (p.103)
w (playback) button (p.50)
(erase) button (p.53)
MENU/OK button
Face zoom in button (p.52) / Help button (p.108)
AE-L/AF-L(AE / AF lock) button (p.62, 69)
Diopter adjustment control (p.40)
Metering selector (p.68)
Focus selector lock (p.59)
AF-ONbutton (p.55)
1 Set the power switch to ON to turn the camera on (➝p.36)
2 Adjust camera settings
Holding the camera correctly
Focus brackets
In-focus
indicator
Halfway
4 Press the shutter button fully
Halfway pressed
ZNumber of available frames
See p.226 about the standard number of available frames for the memory card
Still images viewable on FinePix S5 Pro
1 Zoom in / Zoom out
obutton (Zoom out)
nbutton (Zoom in)
Zoom bar
2 Display another part of the image
1 Zoom in on a face (faces)
zoom bar
BPress MENU/OK to enlarge the image
APress por qto select the frame (file) to erase
BPress
CPress nor oto select [OK]
DPress MENU/OK to erase the frame (file) displayed
Page
ZThe AF-ONbutton
ZPredictive focus tracking
AF-areamode determines how the focus area is selected in autofocus mode
Use the AF-areamode selector to select the AF-areamode
User selects focus area using multi-selector;camera
Focus
User chooses focus area group (see below)
Top Bottom Left Right Center
Single-areaAF is automatically selected when manual focus is used
ZAF-areamode display in the control panel
ZThe display in the control panel and viewfinder
Focus areas are displayed in the control panel and viewfinder as follows:
Normal frame (11 Areas)
Wide frame (7 Areas)
Photography — Features Advanced
ZSetting the focus zone in the [SET UP] menu
ZSetting the focus zone using FUNC. button and sub-commanddial
WIDE
ATurn the focus selector lock to the l position
• When the AF-areamode is set to the dynamic-areaAF
with closest subject priority (➝p.56), the focus-area
cannot be selected.Advanced Features—
ASet the focus-modeselector to M
•Use manual focus while monitoring an image on the
60LCD monitor using the live view display
Focal plane mark
ZFocus aid
1 Focus on a subject
2 Lock the focus
Single-servoAF
Continuous-servoAF
Fully pressed
Page
•AF-assistis not available with the AF-SVR ED 200-400mm f/4G
ZLenses for which vignetting occurs
-AF Micro ED 200 mm f/4D
-AF-SED 28-70mm f/2.8D
-AF-SVR ED 24-120mm f/3.5-5.6G
ZNikon flash units and active assist illuminator
AF lens focal
Normal frame
Wide frame
The shooting operation can be selected from (single
frame), (continuous low speed), (continuous high
speed), * (self-timer),or (mirror up) using the release mode dial
While shutter button is held down, camera records 1-2frames per second
auto exposure, a shutter speed of 1/250s or faster, ISO
ZBuffer Size
Turn the metering selector to desired metering system
For AE lock
CPU LENS DATA] under [ MISC.] in the [SET UP] menu
ASet the exposure mode other than (manual) (➝p.70)
BSet the metering selector to center-weightedor spot metering
Confirm that the in focus indicator (l) appears in the viewfinder
AE-L
Depending on the option selected
•Programmed auto is only available with CPU lenses
Exposure
displayed in the control panel and viewfinder:
BFrame a photograph, focus, and shoot
Flexible program
ZProgram chart
•Shutter-priorityauto is only available with CPU lenses
•Exposure mode (aperture-priorityauto) is
density (ND) filter
•Use a battery with sufficient power when performing bulb shooting
CFrame a photograph, focus, and shoot
BRotate the sub-commanddial to choose the desired aperture
aperture of the lens has been specified in the [NON
in the control panel and viewfinder, rounded to the
nearest full stop. Otherwise the aperture displays will
show only the number of stops
Page
ZElectronic analog exposure display
At a shutter speed of
•When a non-CPUlens is attached and if the maximum
show only the number of stops (, with maximum
AWhile pressing the D, rotate the main-commanddial
When the exposure compensation is set, D appears on the control panel
The compensation value can be checked by pressing the D
–0.3EV
+2 EV
Precision of calculation can be increased for
•Not available when spot metering is used
Standard
To use the built-inflash:
AChoose a metering method
Select matrix or
BPress the flash pop-upbutton. The built-inflash will raise and begin charging
CSet the flash sync mode. (➝p.82)
ZThe shutter speeds and apertures available when the built-inflash is raised
Exposure
fired at full output and the photograph may be
mode
Shutter speed Aperture
ZEffective range of the built-inflash
Aperture at ISO equivalent of:
Metering range
1-7.5m (3.3–24.6ft.)
0.7-5.4m (2.3–17.7ft.)
Page
SLOW REAR
To release flash exposure compensation
Page
ZUsing FV lock with Nikon Speedlights
ZUsing FV Lock with the built-inflash
Lens
Zoom position
Minimum range
The Nikon flash models listed in the table below can be used with this camera
The following features are available with the SB-800, SB-600,and SB-R200:
Speedlight
SB-800
SB-600
SB-80DX, SB-28DX, SB-28
SB-50DX, SB-23, SB-29*2
SB-30, SB-27*1, SB-22S
SB-26, SB-25, SB-24
SB-21B*2, SB-29S*2
ZNotes on using Nikon Speedlights
ISO sensitivity (SB-800/SB-600)
ZThe accessory shoe
ZThe sync terminal
ZAvailable settings for the ISO sensitivity
100/125/160/200/250/320/400/500/640/800/1000/1250
1600/2000/2500/3200
ZSetting the ISO sensitivity in the [SHOOTING MENU]
Select the desired sensitivity for the [ISO] under [SHOOTING MENU]
ZAvailable settings for the image quality
RAW
data
camera. Select this setting when you
want to process the image on a PC
ZAvailable settings for the image size
ZGuide to printed image sizes
ZSetting the image size in the [SHOOTING MENU]
ZSetting the image size using QUAL and the sub- command dial
ZAvailable settings for the white balance
AAUTO
8INCANDESCENT
FLUORESCENT LAMP-1
Select this setting for shots taken under “Daylight” fluorescent lamps
ZSetting the color balance in the [SHOOTING
ZSetting the color balance using WB and the
MENU]
command dials
PRE
ZSetting the color temparture in the [SHOOTING MENU]
ZSetting the color temperature using WB and the command dials
ZFine tuning in the [SHOOTING MENU]
ZSetting the preset white balance in the [SHOOTING MENU]
ASet the focus-modeselector to M (manual)
CPress nor oto select [NEW WB]
DPress q
ZWhen the exposure is not measured correctly
ZSetting the preset white balance using WB and the
ZAvailable settings for the self-timer
Self-TimerMode
4 The picture is taken in the selected time
To cancel the self-timer
•In self-timermode, a shutter speed of is equivalent to approximately 1/3 s
ZAvailable auto bracketing settings
Exposure Bracketing ([AE ONLY])
Flash Bracketing ([d: FLASH ONLY])
3 While pressing BKT, rotate the sub
command dial to choose the exposure
exposure compensation values of more than 5 EV
increment (➝p.106)
To cancel bracketing
ZExposure Bracketing
P:shutter speed and aperture *1 S:aperture*1
A:shutter speed*1 M:shutter speed*2
In single frame and
ZBracketing Programs
1/3 Step Selected for EV Step
No. of shots
Exposure increment
Bracketing order (EVs)
1/2 Step Selected for EV Step
±1/2
+0.5
1 Step Selected for EV Step
1 Display the [SHOOTING MENU]
BPress MENU/OK to open the [SHOOTING MENU]
2 Select the item
APress nor oto select the item
3 Change the setting
Setting the menu (➝p.108)
Menu
Functions
Settings
FILM SIMULATION
Page
ZFine tuning the film simulation
Sets the dynamic range used for photographed images
[AUTO]
[100%(STD)], [130%], [170%], [230%(W1)], [300%], [400%(W2)]
Sets the density of the color used when shooting images
Use this setting to adjust the contrast of images to be shot
[HIGH]
This setting provides the highest color density
[MEDIUM HIGH]
This setting sharpens the outlines more than [STD]. [STD]
This setting applies the optimum level of sharpness for normal shots
[OFF]
•If you want to view or print the image data directly, do not select [OFF]
Sets the color space to either sRGB or Adobe RGB(1998)
Page
Page
•Do not remove or replace the memory card while recording a multiple exposure
No operation is performed for the preset time for the auto power save function
-The camera is turned off
-The battery is exhausted
-w is pressed
4 Enlarge an image for focusing
APress nor oto enlarge an image
BFocus an image manually
•The duration for displaying an image is 30 sec
•Press por qto change brightness
The [SHOOTING MENU] can be reset to the factory default
APress nor oto select [OK]
BPress MENU/OK to reset [SHOOTING
MENU] to the factory default
Resets all [SHOOTING MENU] options except [WB FINE TUNE]
ZThe settings to be reset
Focus area
Center*1
Flexible Program
Cancelled
If the focal length of the lens is known:
Automatic power zoom can be used with optional Nikon
•Lens focal length is listed (with a ) in the playback photo info display
When the maximum aperture of the lens is known:
•The aperture value is displayed in the control panel and viewfinder
ZSetting the lens focal length in the [SET UP] menu
ZSetting the lens focal length using the FUNC. button and main-commanddial
ZSetting the maximum aperture in the [SET UP]
menu
ZSetting the maximum aperture using the FUNC
• Set the focal length before setting the maximum
button and sub-commanddial
ASelect [FV LOCK/LENS DATA] for [FUNC. BUTTON]
Set in the following order
Page
Page
Setting the menu (➝p.126)
Playback — Features Advanced
Total number of prints
Setting for that frame
To cancel DPOF setting
EPress oto set the number of prints to 0 (zero)
To cancel the DPOF setting for another frame (file), repeat steps D and E
Always press MENU/OK to complete the settings
• RESET ALL (➝p.130)
Page
Zu PRINT ORDER (DPOF)
“DPOF SPECIFIED. ERASE OK ?”
“DPOF SPECIFIED. ERASE ALL OK ?” (➝p.127)
“RESET DPOF OK ?” (➝p.129)
[DPOF FILE ERROR] (➝p.215)
To protect or unprotect only the selected frame (file):
Unprotected
Protected (Fdisplayed)
APress por qto select the protecting/ unprotecting frame (file)
BPress MENU/OK to protect/unprotect the currently displayed frame (file)
To stop the procedure midway
If the images are very large, protecting or unprotecting all
the frames (files) may take some time
If you want to take a picture during the procedure, press DISP/BACK
•To interrupt automatic playback, press MENU/OK
Use this function to adjust the screen brightness
APress nor oto adjust the screen brightness
Use this mode to crop the desired part of the photographed image
1 Select the menu
APress por qto select the cropping frame (file)
2 Specify cropping part of an image
obutton
n button
3 Record the image
Page
Page
Press SET UP to open the menu
2 Select the category
APress nor oto select the category to change
CPress nor oto change the setting
DPress MENU/OK to confirm the setting
How to use the SET UP menu (➝p.138)
Setting
Setting (Display)
Page
SHOOTING
USET UP
ROTATE IMAGE
AUTO ROTATE
PLAYBACK
ROTATION] under [ROTATE IMAGE] in the [SET UP] menu
FOCUS AREA
WRAP / NO WRAP
SELECTION
selector in order to select the focus area
BILT-IN AF-ASSIST
FLASH/BKT
Specifies the function performed by the AE-L/AF-Lbutton
ONLY* / AE LOCK
AE-L/AF-LBUTTON
HOLD/RESET / AE
LOCK HOLD / AF
BUTTON AND DIAL
DEFAULT* / HOLD
Disables shooting an image without a memory card
CARD)
MISC
TIME
SYSTEM
ZManually enter a comment
1 Activate [IMAGE COMMENT]
2 Enter a comment
ARotate the main-commanddial to display the desired first letter to enter
BPress qto enter the second letter
•Repeat the steps A-B to enter more letters
•Press por qto select the letter to delete, then press nto delete
ZConnecting to barcode reader
Barcode reader setting
•Baud rate: 4800 bps
•Data length: 8 bit
•Parity check: –
When the camera establishes communication with a GPS
•UTC data is provided by the GPS device and is independent of the camera clock
•GPS data is only recorded when the icon is
displayed. Confirm that the icon is displayed in the
pictures taken while the icon is flashing will not include GPS data
Page
“Tall” photos are displayed in “wide” (landscape) orientation
Landscape
Camerarotated
(wide)
90° clockwise
Page
[P2: CLOSEST SUBJECT]
[BUTTON ASSIGNMENT] in the [SET UP] menu
ZCenter Area
ZClosest Subject
[LONG], [NORMAL], [SHORT]
Selected focus area is not highlighted
This option determines what controls lock exposure
[R/A:RELEASE/AE-L]
[A:AE-LONLY]
Exposure can only be locked by pressing the AE-L/AF-L button
[ISO AUTO CONTROL]
To change the setting, select an item and press q. Then press nor o
[MIN.SHUTTER SPEED]
To change the setting, select the item and press q. Then press nor o
1/250–1SEC:
[ISO AUTO CONTROL]
•When a flash is used, ISO sensitivity will be adjusted for the flash level
ZISO auto control indicator
When [ON] is selected, the control panel and viewfinder
show ISO-AUTO.When sensitivity is altered from the
Choose whether adjustments to shutter speed, aperture
value selected by the user, these indicators blink and the
[TEMPORARY]
CHANGE MAIN/SUB
Exposure compensation set by pressing D button and rotating main command dial
1 Display the confirmation screen
APress nor oto select [FINE TUNE
2 Change the setting
[1/250(AUTO FP)]
APress nor oto select the metering to change
ZFixing shutter speed at the flash sync speed limit
Choose the flash mode for the built-inflash
[TTLd: TTL MODE]
Flash output is adjusted automatically in response to shooting conditions
[Md: MANUAL MODE]
[Rd: REPEATING MODE]
ZSetting the manual flash mode
ZSetting the repeating
ZTimes
Output
ZSetting the commander mode
[A GRP.]
Choose this option to use the built-inflash as a master
Choose flash mode for all flashes in group A
in up to two groups (A and B) using Advanced Wireless
1 Set the menu
2 Shooting
CPress flash pop-upbutton to raise built-inflash (note
MEMO Commander Mode
that built-inflash must be raised even if [–]is selected
for the [MODE] under [BUILT-IN])
built-inflash (take particular care when not using a
Option
Page
Page
This option controls the function performed by the FUNC. button
[FV LOCK]
[FV LOCK/LENS DATA]
[1 STEP Tv/Av]
[SAME AS AE-L/AF-L]
These functions can be specified by the [SELECTED FUNCTION]
The functions to be locked by the [BASIC FUNCTION]
ZMaking the Lock Setting
ZSetting the function to be locked
ZSetting the password
To change the password
This option controls the operation of the main and sub- command dials
[ROTATE DIRECTION]
[NORMAL]
Normal command dial operation. [REVERSE]
Page
Page
See p.121 for details
To ensure that the camera functions as expected when
batteries are used in the Nikon
-AA manganese battery
-AA NiCad battery
Recommendation:
1 Use time difference function
2 Move to [TIME DIFFERENCE] screen
Available time setting
3 Set time difference
Initialize (format) the memory card for use with the camera
APress nor oto select OK
BPress MENU/OK to initialize the memory card
MTP(PTP)]
to the PC or to use PictBridge. The camera can be
<CONTINUOUS> <RENEW
*Formatted memory card used for both A and B
[RENEW]
Pictures are stored on each memory card beginning with a file number
Frame number
[LOW] Low pitch beep [HIGH] High pitch beep [OFF] No beep
Specifies whether video output is set to [NTSC] or [PAL]
Returns all camera settings (other than [] PRESET
CUSTOM], [DATE/TIME], [] and [VIDEO SYSTEM]) to their factory default values
To terminals
Plug the Video cable (included)
into the VIDEO OUT (Video
Video (yellow)
output) socket of the camera
;USB socket
Connection Camera
Page
MEMO Printing with date
When printing stops midway, briefly turn the camera off and then on again
Disconnecting the printer
ACheck that [PRINTING] is not displayed on the camera’s screen
BTurn the camera off. Unplug the USB cable (mini-B)
For best result, please connect the AC Power Adapter
•Use memory card that was formatted on FinePix S5 Pro
•Movies and CCD-RAWimages cannot be printed
When [ON] is set for the [QUICK PREVIEW DATA] under
ZHardware and software requirements
CPU
RAM
Hard disk space
Display
ZRecommended system
Operating System
Internet connection
Installation Software
1 Install FinePixViewer as instructed in the Quick start guide
Launching the installer manually
ADouble-clickthe “My Computer” icon
*Windows XP users should click “My Computer” in the “Start” menu
CDouble-click“SETUP” or “SETUP.exe” in the CD-ROMwindow
Compatible Mac*1
Internet connection*3
Installation on a Mac OS
3 Double-clickon “Installer for MacOSX”
7 The “Read me” dialog appears. Click the [Continue] button
11Launch “Image Capture” from the “Applications” folder
13Select “Other...” from “When a camera is connected, open”
15Select “Quit Image Capture” menu in the
“Image Capture” menu.Software Installation
Software Installation
CSelect [MTP(PTP)] for [USB MODE] under [SYSTEM] in the [SET UP] menu
(Software for FinePix CX)
DTurn the power switch to OFF to turn the camera off
EConnect the camera to your PC using the USB cable (mini-B)
AInsert the memory card with images into the camera (➝p.34)
If the camera communicates with the PC successfully
See the manuals provided with the supplied software for more information
• FinePix S5 Pro is compatible with MTP/PTP (Picture
camera which can recognize the PC and printer
automatically when connected
Windows XP
Windows 98 SE / Me / 2000 Professional
Macintosh
1 Windows
•What is explained in “How to Use FinePixViewer”
Example: Looking up slide shows
Windows
Page
USB
*FinePix S5 Pro accessories, or sold separately ***Other manufacturer products
ZUsable Nikon accessories
**Nikon products ***Other manufacturer products
Appendices
• Rechargeable Battery NP-150(1500mAh)
•Battery Charger BC-150
•AC Power Adapter AC-135VN
•Hyper-UtilitySoftware HS-V3
•Hyper-UtilitySoftware HS-V3UP
ZPlaces to Avoid
Do not store or use the camera in the following types of locations:
•In the rain or in very humid, dirty, or dusty places
•Extremely cold places
•Places with strong vibration
Dust inside the camera and on the surface of the CCD
BPress nor oto select [OK]
[- - - - - -]is displayed in the control panel
FIn case of surface clean
In case of surface soiling
•Note that this option is not available at battery
levels less than or while shooting multiple exposures
If the battery runs low while the mirror is raised, a beep will sound and the
ZEnsure that you have the cleaning equipment
ready
Page
Notes on the Battery (NP-150)
*When shipped, the NP-150is not fully charged. Always
charge the NP-150before using it
When carrying the
ZBattery Features
Notes on storage
•Store the battery in a cool place
*Do not leave the battery in hot or extremely cold places
ZHandling the Battery
To avoid injury or damage, observe the following:
Page
ZProtecting Your Data
2.Improper handling and use of the memory card by the user or third party
ZHandling Memory card (all types)
ZUsing CompactFlash
•Do not touch the card contact area with your fingers or metal objects
Explanation
Remedy
Reduce quality or size
Delete photographs
Insert new memory card
No memory card
Insert memory card
Warning Displays
Warning Displayed
Memory card is not inserted
Insert a memory card
• Memory card is not formatted
An attempt was made to erase a protected file
Protected files cannot be erased. Remove the
protection (➝p.132)
It is impossible to playback
empty memory card
Page
Page
ZGetting ready
Matters
Problems
Possible causes
Solutions
ZShooting
The memory card is full
unnecessary frames
The memory card is not formatted
indicator “l” not lit)
Page
ZPlaying back
ZConnecting
ZOthers
System
Model
Digital camera FinePix S5 Pro
Effective pixels
12.34 million (S-pixel:6.17 million, R-pixel:6.17 million) pixels
Specifications
White balance
*Can be fine tuned
Self-timer
20 sec./10 sec./5 sec./2 sec
Input/Output Terminal
Video output
NTSC/PAL-type
Digital interface
USB 2.0 High-Speed,MTP/PTP (Picture Transfer Protocol)
ZMemory card capacity and image quality/size
[D-RANGE]set to [100%(STD)]
Image quality
Image size
No. of images
[D-RANGE]set to WIDE (other than [100%(STD)])
JPEG
Smear
White Balance
CCD-RAW
Color Temperature
Adobe RGB (1998)
Color space
Page
Page
FUJIFILM Digital Camera Worldwide Network
Page
Page
Page
Page
Page
•After reading these Safety Notes, store them in a safe place
WARNING
remove the battery, disconnect and
unplug the AC power adapter
Continued use of the camera when it is
Do not place the camera on an unstable surface
Never attempt to take pictures while in motion
Do not use the battery except as specified
Do not heat, change or take apart the battery
Do not drop or subject the battery to impacts
Safety Notes
When storing the NP-150,keep it in the soft case provided
Keep memory cards out of the reach of small children
Do not leave this camera in places subject to extremely high temperatures
This product could cause injury in the hands of a child
Failure to do so can cause a fire or electric shock
Using a flash too close to a person’s eyes may temporarily affect the eyesight
Request regular internal testing and cleaning for your camera
Build-upof dust in your camera can cause a fire or electric shock
•Please note this is not a free of charge service
Page
Page
http://www.fujifilm.com/products/digital
