Manuals / Brands / Photography / Digital Camera / FujiFilm / Photography / Digital Camera

FujiFilm FinePix S5 Pro ZProgram chart, Flexible program

1 244

Download 244 pages, 7.37 Mb

Flexible program

In mode , different combinations of shutter speed and aperture can be selected by rotating the main-command dial (“flexible program”). All combinations produce the same exposure. While flexible program is in effect, an asterisk (“ ”) appears next to the exposure-mode indicator in the control panel.

To restore default shutter speed and aperture settings, rotate the main-command dial until the indicator is no longer displayed. Default settings can also be restored by turning the camera off , selecting another exposure mode, performing a two-button reset (➝p.120) or change the setting for the [EV CONTROL STEPS] under [SEXPOSURE] in the [SET UP] menu.

ZProgram chart

The program chart shows exposure control in flexible program (ISO 100).

ISO 100; lens with maximum aperture of f/1.4 and minimum aperture of f/16 (e.g., AF 50 mm f/1.4 D)

]	-4		-3	-2	-1											0	1	2			Advanced
[EV	-4		-3	-2	-1	0	1	2	3	4	5	6	7	8	9	0	1	2	3
[EV																1	1	1	1
F1																			14
F1.4																			14
																			15		Features

F2																			16	1/3
F2																			16	1/3
F2.8																			16
F2.8																			17
F4																			17
F4																			18		—
F5.6																			18
																			19
																					Photography
F8
																			20

F11
F11																			21
F16																			21
F16																			22
F22																			22
F22																			23
F32																			23
F32		8"	4"	2"	1"	2	4	8	15	30	60 125		250	500	1000 2000 4000 8000
30" 15"		8"	4"	2"	1"	2	4	8	15	30	60 125		250	500	1000 2000 4000 8000

•The maximum and minimum values for EV vary with sensitivity (ISO equivalency); the above graph assumes a sensitivity of ISO 100 equivalent.

•When matrix metering is used, values over 16 1/3 EV are reduced to 16 1/3 EV in case of ISO 100.

71

Contents

Page For customers in the U.S.A FCC Statement For customers in Canada Be sure to read this page before using the software End User License Agreement Page Disposal of used Electrical & Electronic Equipment product In Countries outside the EU: Setting the camera to playback mode Single-frameplayback Multi-frameplayback Using the erase button Focus mode Changing the Image Quality Setting Changing the Image Size Setting Adjusting Color Balance (TWHITE BALANCE) CHOOSE COLOR TEMP MAINTENANCE Cleaning the CCD TIME Warning messages displayed in the control panel and viewfinder ZTest Shots Prior to Photography ZNotes on Copyright ZHandling Your Digital Camera ZLiquid Crystal •If liquid crystal gets into your eye ZNotes on Electrical Interference ZExplanation of Color Television System ZExif Print (Exif ver. 2.2) This mark denotes issues that may affect the camera’s operation CHECK This mark denotes points to notice in the camera’s operation MEMO Page Page Page Page Page ZControl panel ZThe LCD Illuminator ZViewfinder AFraming grid B8-mm (0.31-in.)reference circle for center-weightedmetering (p.68) C“No memory card” warning* (p.213) DBattery indicator* (p.33) HMetering (p.68) ZLCD Monitor Photo information Highlights can be displayed separately for each of the following: histogram for ZLarge-capacitymemory cards ZCamera off display About advanced focusing screen display Page Attaching the Strap and Lens Mounting index •Always change the lens in an area free of dirt and dust •When attaching the lens, take care not to press the lens release button Detaching lenses ZLens compatibility Types of CPU lenses and other usable lenses/accessories Focus mode P S A M Page ZG-typeNikkor and other CPU Nikkor lens ZWhen a non-CPUlens is attached ZNikkor lenses/accessories that cannot be attached to the FinePix S5 Pro 2 Press the bottom of the cover until it clicks into place ZCompatible battery Rechargeable Battery NP-150 Indicator Terminals ZRechargeable battery NP-150 Page Set the power switch to OFF to turn the camera off (➝p.36) Open the battery cover Removing the battery Do not apply excessive force to the battery cover 3 Load the battery as shown below Page Photographs are stored on CompactFlash/Microdrive (available separately) ZAvailable CompactFlash/Microdrive The following cards have been tested and approved for use with the S5 Pro: • SanDisk SDCFH ATurn the camera on (➝p.36) BPress and MODE simultaneously for about 2 seconds blinks in the control panel and viewfinder CPress and MODE again DAfter formatting is completed, the control panel shows 1 [ ] screen appears when turning the camera on APress n, o, p, or q to select the language BPress MENU/OK to confirm the setting 2 Set the date and time 3 Change the date format Date format Turning On and Off 1 Open the [SET UP] menu 2 Display the [DATE/TIME] screen Focus brackets 2 Display the [] screen Shutter button (p.49) Power switch (p.36)/Illuminator switch (p.18) Accessory shoe (p.91) Flash pop-upbutton (p.79) Focus-modeselector (p.47, 54) Release mode dial unlock button (p.66) 94) Release mode dial (p.66) ISO (ISO sensitivity) button (p.92) Camera the Using Sub-commanddial Depth-of-fieldpreview button (p.65) FUNC. Button (p.168) 10-pinremote terminal Lens release button (p.24) BKT (bracketing) button (p.103) w (playback) button (p.50) (erase) button (p.53) MENU/OK button Face zoom in button (p.52) / Help button (p.108) AE-L/AF-L(AE / AF lock) button (p.62, 69) Diopter adjustment control (p.40) Metering selector (p.68) Focus selector lock (p.59) AF-ONbutton (p.55) 1 Set the power switch to ON to turn the camera on (➝p.36) 2 Adjust camera settings Holding the camera correctly Focus brackets In-focus indicator Halfway 4 Press the shutter button fully Halfway pressed ZNumber of available frames See p.226 about the standard number of available frames for the memory card Still images viewable on FinePix S5 Pro 1 Zoom in / Zoom out obutton (Zoom out) nbutton (Zoom in) Zoom bar 2 Display another part of the image 1 Zoom in on a face (faces) zoom bar BPress MENU/OK to enlarge the image APress por qto select the frame (file) to erase BPress CPress nor oto select [OK] DPress MENU/OK to erase the frame (file) displayed Page ZThe AF-ONbutton ZPredictive focus tracking AF-areamode determines how the focus area is selected in autofocus mode Use the AF-areamode selector to select the AF-areamode User selects focus area using multi-selector;camera Focus User chooses focus area group (see below) Top Bottom Left Right Center Single-areaAF is automatically selected when manual focus is used ZAF-areamode display in the control panel ZThe display in the control panel and viewfinder Focus areas are displayed in the control panel and viewfinder as follows: Normal frame (11 Areas) Wide frame (7 Areas) Photography — Features Advanced ZSetting the focus zone in the [SET UP] menu ZSetting the focus zone using FUNC. button and sub-commanddial WIDE ATurn the focus selector lock to the l position • When the AF-areamode is set to the dynamic-areaAF with closest subject priority (➝p.56), the focus-area cannot be selected.Advanced Features— ASet the focus-modeselector to M •Use manual focus while monitoring an image on the 60LCD monitor using the live view display Focal plane mark ZFocus aid 1 Focus on a subject 2 Lock the focus Single-servoAF Continuous-servoAF Fully pressed Page •AF-assistis not available with the AF-SVR ED 200-400mm f/4G ZLenses for which vignetting occurs -AF Micro ED 200 mm f/4D -AF-SED 28-70mm f/2.8D -AF-SVR ED 24-120mm f/3.5-5.6G ZNikon flash units and active assist illuminator AF lens focal Normal frame Wide frame The shooting operation can be selected from (single frame), (continuous low speed), (continuous high speed), * (self-timer),or (mirror up) using the release mode dial While shutter button is held down, camera records 1-2frames per second auto exposure, a shutter speed of 1/250s or faster, ISO ZBuffer Size Turn the metering selector to desired metering system For AE lock CPU LENS DATA] under [ MISC.] in the [SET UP] menu ASet the exposure mode other than (manual) (➝p.70) BSet the metering selector to center-weightedor spot metering Confirm that the in focus indicator (l) appears in the viewfinder AE-L Depending on the option selected •Programmed auto is only available with CPU lenses Exposure displayed in the control panel and viewfinder: BFrame a photograph, focus, and shoot Flexible program ZProgram chart •Shutter-priorityauto is only available with CPU lenses •Exposure mode (aperture-priorityauto) is density (ND) filter •Use a battery with sufficient power when performing bulb shooting CFrame a photograph, focus, and shoot BRotate the sub-commanddial to choose the desired aperture aperture of the lens has been specified in the [NON in the control panel and viewfinder, rounded to the nearest full stop. Otherwise the aperture displays will show only the number of stops Page ZElectronic analog exposure display At a shutter speed of •When a non-CPUlens is attached and if the maximum show only the number of stops (, with maximum AWhile pressing the D, rotate the main-commanddial When the exposure compensation is set, D appears on the control panel The compensation value can be checked by pressing the D –0.3EV +2 EV Precision of calculation can be increased for •Not available when spot metering is used Standard To use the built-inflash: AChoose a metering method Select matrix or BPress the flash pop-upbutton. The built-inflash will raise and begin charging CSet the flash sync mode. (➝p.82) ZThe shutter speeds and apertures available when the built-inflash is raised Exposure fired at full output and the photograph may be mode Shutter speed Aperture ZEffective range of the built-inflash Aperture at ISO equivalent of: Metering range 1-7.5m (3.3–24.6ft.) 0.7-5.4m (2.3–17.7ft.) Page SLOW REAR To release flash exposure compensation Page ZUsing FV lock with Nikon Speedlights ZUsing FV Lock with the built-inflash Lens Zoom position Minimum range The Nikon flash models listed in the table below can be used with this camera The following features are available with the SB-800, SB-600,and SB-R200: Speedlight SB-800 SB-600 SB-80DX, SB-28DX, SB-28 SB-50DX, SB-23, SB-29*2 SB-30, SB-27*1, SB-22S SB-26, SB-25, SB-24 SB-21B*2, SB-29S*2 ZNotes on using Nikon Speedlights ISO sensitivity (SB-800/SB-600) ZThe accessory shoe ZThe sync terminal ZAvailable settings for the ISO sensitivity 100/125/160/200/250/320/400/500/640/800/1000/1250 1600/2000/2500/3200 ZSetting the ISO sensitivity in the [SHOOTING MENU] Select the desired sensitivity for the [ISO] under [SHOOTING MENU] ZAvailable settings for the image quality RAW data camera. Select this setting when you want to process the image on a PC ZAvailable settings for the image size ZGuide to printed image sizes ZSetting the image size in the [SHOOTING MENU] ZSetting the image size using QUAL and the sub- command dial ZAvailable settings for the white balance AAUTO 8INCANDESCENT FLUORESCENT LAMP-1 Select this setting for shots taken under “Daylight” fluorescent lamps ZSetting the color balance in the [SHOOTING ZSetting the color balance using WB and the MENU] command dials PRE ZSetting the color temparture in the [SHOOTING MENU] ZSetting the color temperature using WB and the command dials ZFine tuning in the [SHOOTING MENU] ZSetting the preset white balance in the [SHOOTING MENU] ASet the focus-modeselector to M (manual) CPress nor oto select [NEW WB] DPress q ZWhen the exposure is not measured correctly ZSetting the preset white balance using WB and the ZAvailable settings for the self-timer Self-TimerMode 4 The picture is taken in the selected time To cancel the self-timer •In self-timermode, a shutter speed of is equivalent to approximately 1/3 s ZAvailable auto bracketing settings Exposure Bracketing ([AE ONLY]) Flash Bracketing ([d: FLASH ONLY]) 3 While pressing BKT, rotate the sub command dial to choose the exposure exposure compensation values of more than 5 EV increment (➝p.106) To cancel bracketing ZExposure Bracketing P:shutter speed and aperture *1 S:aperture*1 A:shutter speed*1 M:shutter speed*2 In single frame and ZBracketing Programs 1/3 Step Selected for EV Step No. of shots Exposure increment Bracketing order (EVs) 1/2 Step Selected for EV Step ±1/2 +0.5 1 Step Selected for EV Step 1 Display the [SHOOTING MENU] BPress MENU/OK to open the [SHOOTING MENU] 2 Select the item APress nor oto select the item 3 Change the setting Setting the menu (➝p.108) Menu Functions Settings FILM SIMULATION Page ZFine tuning the film simulation Sets the dynamic range used for photographed images [AUTO] [100%(STD)], [130%], [170%], [230%(W1)], [300%], [400%(W2)] Sets the density of the color used when shooting images Use this setting to adjust the contrast of images to be shot [HIGH] This setting provides the highest color density [MEDIUM HIGH] This setting sharpens the outlines more than [STD]. [STD] This setting applies the optimum level of sharpness for normal shots [OFF] •If you want to view or print the image data directly, do not select [OFF] Sets the color space to either sRGB or Adobe RGB(1998) Page Page •Do not remove or replace the memory card while recording a multiple exposure No operation is performed for the preset time for the auto power save function -The camera is turned off -The battery is exhausted -w is pressed 4 Enlarge an image for focusing APress nor oto enlarge an image BFocus an image manually •The duration for displaying an image is 30 sec •Press por qto change brightness The [SHOOTING MENU] can be reset to the factory default APress nor oto select [OK] BPress MENU/OK to reset [SHOOTING MENU] to the factory default Resets all [SHOOTING MENU] options except [WB FINE TUNE] ZThe settings to be reset Focus area Center*1 Flexible Program Cancelled If the focal length of the lens is known: Automatic power zoom can be used with optional Nikon •Lens focal length is listed (with a ) in the playback photo info display When the maximum aperture of the lens is known: •The aperture value is displayed in the control panel and viewfinder ZSetting the lens focal length in the [SET UP] menu ZSetting the lens focal length using the FUNC. button and main-commanddial ZSetting the maximum aperture in the [SET UP] menu ZSetting the maximum aperture using the FUNC • Set the focal length before setting the maximum button and sub-commanddial ASelect [FV LOCK/LENS DATA] for [FUNC. BUTTON] Set in the following order Page Page Setting the menu (➝p.126) Playback — Features Advanced Total number of prints Setting for that frame To cancel DPOF setting EPress oto set the number of prints to 0 (zero) To cancel the DPOF setting for another frame (file), repeat steps D and E Always press MENU/OK to complete the settings • RESET ALL (➝p.130) Page Zu PRINT ORDER (DPOF) “DPOF SPECIFIED. ERASE OK ?” “DPOF SPECIFIED. ERASE ALL OK ?” (➝p.127) “RESET DPOF OK ?” (➝p.129) [DPOF FILE ERROR] (➝p.215) To protect or unprotect only the selected frame (file): Unprotected Protected (Fdisplayed) APress por qto select the protecting/ unprotecting frame (file) BPress MENU/OK to protect/unprotect the currently displayed frame (file) To stop the procedure midway If the images are very large, protecting or unprotecting all the frames (files) may take some time If you want to take a picture during the procedure, press DISP/BACK •To interrupt automatic playback, press MENU/OK Use this function to adjust the screen brightness APress nor oto adjust the screen brightness Use this mode to crop the desired part of the photographed image 1 Select the menu APress por qto select the cropping frame (file) 2 Specify cropping part of an image obutton n button 3 Record the image Page Page Press SET UP to open the menu 2 Select the category APress nor oto select the category to change CPress nor oto change the setting DPress MENU/OK to confirm the setting How to use the SET UP menu (➝p.138) Setting Setting (Display) Page SHOOTING USET UP ROTATE IMAGE AUTO ROTATE PLAYBACK ROTATION] under [ROTATE IMAGE] in the [SET UP] menu FOCUS AREA WRAP / NO WRAP SELECTION selector in order to select the focus area BILT-IN AF-ASSIST FLASH/BKT Specifies the function performed by the AE-L/AF-Lbutton ONLY* / AE LOCK AE-L/AF-LBUTTON HOLD/RESET / AE LOCK HOLD / AF BUTTON AND DIAL DEFAULT* / HOLD Disables shooting an image without a memory card CARD) MISC TIME SYSTEM ZManually enter a comment 1 Activate [IMAGE COMMENT] 2 Enter a comment ARotate the main-commanddial to display the desired first letter to enter BPress qto enter the second letter •Repeat the steps A-B to enter more letters •Press por qto select the letter to delete, then press nto delete ZConnecting to barcode reader Barcode reader setting •Baud rate: 4800 bps •Data length: 8 bit •Parity check: – When the camera establishes communication with a GPS •UTC data is provided by the GPS device and is independent of the camera clock •GPS data is only recorded when the icon is displayed. Confirm that the icon is displayed in the pictures taken while the icon is flashing will not include GPS data Page “Tall” photos are displayed in “wide” (landscape) orientation Landscape Camerarotated (wide) 90° clockwise Page [P2: CLOSEST SUBJECT] [BUTTON ASSIGNMENT] in the [SET UP] menu ZCenter Area ZClosest Subject [LONG], [NORMAL], [SHORT] Selected focus area is not highlighted This option determines what controls lock exposure [R/A:RELEASE/AE-L] [A:AE-LONLY] Exposure can only be locked by pressing the AE-L/AF-L button [ISO AUTO CONTROL] To change the setting, select an item and press q. Then press nor o [MIN.SHUTTER SPEED] To change the setting, select the item and press q. Then press nor o 1/250–1SEC: [ISO AUTO CONTROL] •When a flash is used, ISO sensitivity will be adjusted for the flash level ZISO auto control indicator When [ON] is selected, the control panel and viewfinder show ISO-AUTO.When sensitivity is altered from the Choose whether adjustments to shutter speed, aperture value selected by the user, these indicators blink and the [TEMPORARY] CHANGE MAIN/SUB Exposure compensation set by pressing D button and rotating main command dial 1 Display the confirmation screen APress nor oto select [FINE TUNE 2 Change the setting [1/250(AUTO FP)] APress nor oto select the metering to change ZFixing shutter speed at the flash sync speed limit Choose the flash mode for the built-inflash [TTLd: TTL MODE] Flash output is adjusted automatically in response to shooting conditions [Md: MANUAL MODE] [Rd: REPEATING MODE] ZSetting the manual flash mode ZSetting the repeating ZTimes Output ZSetting the commander mode [A GRP.] Choose this option to use the built-inflash as a master Choose flash mode for all flashes in group A in up to two groups (A and B) using Advanced Wireless 1 Set the menu 2 Shooting CPress flash pop-upbutton to raise built-inflash (note MEMO Commander Mode that built-inflash must be raised even if [–]is selected for the [MODE] under [BUILT-IN]) built-inflash (take particular care when not using a Option Page Page This option controls the function performed by the FUNC. button [FV LOCK] [FV LOCK/LENS DATA] [1 STEP Tv/Av] [SAME AS AE-L/AF-L] These functions can be specified by the [SELECTED FUNCTION] The functions to be locked by the [BASIC FUNCTION] ZMaking the Lock Setting ZSetting the function to be locked ZSetting the password To change the password This option controls the operation of the main and sub- command dials [ROTATE DIRECTION] [NORMAL] Normal command dial operation. [REVERSE] Page Page See p.121 for details To ensure that the camera functions as expected when batteries are used in the Nikon -AA manganese battery -AA NiCad battery Recommendation: 1 Use time difference function 2 Move to [TIME DIFFERENCE] screen Available time setting 3 Set time difference Initialize (format) the memory card for use with the camera APress nor oto select OK BPress MENU/OK to initialize the memory card MTP(PTP)] to the PC or to use PictBridge. The camera can be <CONTINUOUS> <RENEW *Formatted memory card used for both A and B [RENEW] Pictures are stored on each memory card beginning with a file number Frame number [LOW] Low pitch beep [HIGH] High pitch beep [OFF] No beep Specifies whether video output is set to [NTSC] or [PAL] Returns all camera settings (other than [] PRESET CUSTOM], [DATE/TIME], [] and [VIDEO SYSTEM]) to their factory default values To terminals Plug the Video cable (included) into the VIDEO OUT (Video Video (yellow) output) socket of the camera ;USB socket Connection Camera Page MEMO Printing with date When printing stops midway, briefly turn the camera off and then on again Disconnecting the printer ACheck that [PRINTING] is not displayed on the camera’s screen BTurn the camera off. Unplug the USB cable (mini-B) For best result, please connect the AC Power Adapter •Use memory card that was formatted on FinePix S5 Pro •Movies and CCD-RAWimages cannot be printed When [ON] is set for the [QUICK PREVIEW DATA] under ZHardware and software requirements CPU RAM Hard disk space Display ZRecommended system Operating System Internet connection Installation Software 1 Install FinePixViewer as instructed in the Quick start guide Launching the installer manually ADouble-clickthe “My Computer” icon *Windows XP users should click “My Computer” in the “Start” menu CDouble-click“SETUP” or “SETUP.exe” in the CD-ROMwindow Compatible Mac*1 Internet connection*3 Installation on a Mac OS 3 Double-clickon “Installer for MacOSX” 7 The “Read me” dialog appears. Click the [Continue] button 11Launch “Image Capture” from the “Applications” folder 13Select “Other...” from “When a camera is connected, open” 15Select “Quit Image Capture” menu in the “Image Capture” menu.Software Installation Software Installation CSelect [MTP(PTP)] for [USB MODE] under [SYSTEM] in the [SET UP] menu (Software for FinePix CX) DTurn the power switch to OFF to turn the camera off EConnect the camera to your PC using the USB cable (mini-B) AInsert the memory card with images into the camera (➝p.34) If the camera communicates with the PC successfully See the manuals provided with the supplied software for more information • FinePix S5 Pro is compatible with MTP/PTP (Picture camera which can recognize the PC and printer automatically when connected Windows XP Windows 98 SE / Me / 2000 Professional Macintosh 1 Windows •What is explained in “How to Use FinePixViewer” Example: Looking up slide shows Windows Page USB *FinePix S5 Pro accessories, or sold separately ***Other manufacturer products ZUsable Nikon accessories **Nikon products ***Other manufacturer products Appendices • Rechargeable Battery NP-150(1500mAh) •Battery Charger BC-150 •AC Power Adapter AC-135VN •Hyper-UtilitySoftware HS-V3 •Hyper-UtilitySoftware HS-V3UP ZPlaces to Avoid Do not store or use the camera in the following types of locations: •In the rain or in very humid, dirty, or dusty places •Extremely cold places •Places with strong vibration Dust inside the camera and on the surface of the CCD BPress nor oto select [OK] [- - - - - -]is displayed in the control panel FIn case of surface clean In case of surface soiling •Note that this option is not available at battery levels less than or while shooting multiple exposures If the battery runs low while the mirror is raised, a beep will sound and the ZEnsure that you have the cleaning equipment ready Page Notes on the Battery (NP-150) *When shipped, the NP-150is not fully charged. Always charge the NP-150before using it When carrying the ZBattery Features Notes on storage •Store the battery in a cool place *Do not leave the battery in hot or extremely cold places ZHandling the Battery To avoid injury or damage, observe the following: Page ZProtecting Your Data 2.Improper handling and use of the memory card by the user or third party ZHandling Memory card (all types) ZUsing CompactFlash •Do not touch the card contact area with your fingers or metal objects Explanation Remedy Reduce quality or size Delete photographs Insert new memory card No memory card Insert memory card Warning Displays Warning Displayed Memory card is not inserted Insert a memory card • Memory card is not formatted An attempt was made to erase a protected file Protected files cannot be erased. Remove the protection (➝p.132) It is impossible to playback empty memory card Page Page ZGetting ready Matters Problems Possible causes Solutions ZShooting The memory card is full unnecessary frames The memory card is not formatted indicator “l” not lit) Page ZPlaying back ZConnecting ZOthers System Model Digital camera FinePix S5 Pro Effective pixels 12.34 million (S-pixel:6.17 million, R-pixel:6.17 million) pixels Specifications White balance *Can be fine tuned Self-timer 20 sec./10 sec./5 sec./2 sec Input/Output Terminal Video output NTSC/PAL-type Digital interface USB 2.0 High-Speed,MTP/PTP (Picture Transfer Protocol) ZMemory card capacity and image quality/size [D-RANGE]set to [100%(STD)] Image quality Image size No. of images [D-RANGE]set to WIDE (other than [100%(STD)]) JPEG Smear White Balance CCD-RAW Color Temperature Adobe RGB (1998) Color space Page Page FUJIFILM Digital Camera Worldwide Network Page Page Page Page Page •After reading these Safety Notes, store them in a safe place WARNING remove the battery, disconnect and unplug the AC power adapter Continued use of the camera when it is Do not place the camera on an unstable surface Never attempt to take pictures while in motion Do not use the battery except as specified Do not heat, change or take apart the battery Do not drop or subject the battery to impacts Safety Notes When storing the NP-150,keep it in the soft case provided Keep memory cards out of the reach of small children Do not leave this camera in places subject to extremely high temperatures This product could cause injury in the hands of a child Failure to do so can cause a fire or electric shock Using a flash too close to a person’s eyes may temporarily affect the eyesight Request regular internal testing and cleaning for your camera Build-upof dust in your camera can cause a fire or electric shock •Please note this is not a free of charge service Page Page http://www.fujifilm.com/products/digital