USET UP

How to use the SET UP menu (➝p.138)

 

 

FUNC. BUTTON

This option controls the function performed by the FUNC. button.[FV LOCK]

If built-in flash or Nikon CLS-compatible Speedlight is used, flash value locks when FUNC. button is pressed. Press again to cancel FV lock.

[FV LOCK/LENS DATA]

Same as above, except that if built-in flash is lowered or Nikon CLS-compatible Speedlight is not attached, use the FUNC. button and command dials to specify focal length and aperture of non-CPU lenses (➝p.122, 123).

[1 STEP Tv/Av]

If FUNC. button is pressed when rotating command dials, changes to shutter speed (exposure modes S and M) and aperture (exposure modes A and M) are made in increments of 1 EV.

[SAME AS AE-L/AF-L]FUNC. button performs same functions as AE-L/AF-L button.[FLASH OFF]Flash will not fire in photos taken while FUNC. button is pressed.[BRACKETING BURST]

While FUNC. button is pressed, all shots in exposure or flash bracketing program will be taken each time the shutter button is pressed. In continuous high-speed and continuous low-speed modes, camera will repeat bracketing burst while the shutter button is held down.

[MATRIX METERING]Matrix metering activated while FUNC. button is pressed.

168

[CENTER–WEIGHTED]Center-weighted metering activated while FUNC. button is pressed.[SPOT METERING]Spot metering activated while FUNC. button is pressed.[FOCUS AREA FRAME]

Press FUNC. button and rotate sub-command dial to cycle between normal and wide focus areas (➝p.57).