USET UP

 

 

 

 

 

 

How to use the SET UP menu (➝p.138)

 

 

 

 

 

 

 

 

ZSetting the commander mode[A GRP.]

 

Choose this option to use the built-in flash as a master

 

Choose flash mode for all flashes in group A.

 

 

 

flash controlling one or more remote optional Speedlights

 

TTL

i-TTL mode. Menu of flash compensation values

in up to two groups (A and B) using Advanced Wireless

 

 

will be displayed; choose value between +3.0 and

Lighting.

 

 

 

 

 

 

–3.0 EV in steps of 1/3 EV.

 

 

 

 

 

 

 

 

 

 

[BUILT-IN]

 

 

 

 

 

AA

Auto aperture (not available with SB-600 and SB-

 

 

 

 

 

 

R200 Speedlights). Menu of flash compensation

 

Choose flash mode for built-in flash (commander

 

 

 

 

 

values will be displayed; choose value between

 

flash).

 

 

 

 

 

 

 

 

 

 

 

 

 

+3.0 and –3.0 EV in steps of 1/3 EV.

 

TTL

i-TTL mode. Menu of flash compensation values

 

M

Choose flash output level for flashes in Group A

 

 

will be displayed; choose value between +3.0 and

 

 

 

 

 

from values between full power and 1/128 power

 

 

–3.0 EV in steps of 1/3 EV. At settings other than

 

 

 

 

 

 

(1/128 of full power).

 

 

±0,

 

will be displayed in control panel and

 

 

 

 

 

 

 

—

Flashes in group A do not fire.

 

 

viewfinder.

 

 

 

 

M

Choose flash output level for built-in flash from

 

 

 

 

 

values between full power and 1/128 power (1/128

[B GRP.]

 

 

 

of full power).

 

flashes in control panel and

 

Choose flash mode for all flashes in group B.

 

 

viewfinder.

 

 

 

 

 

 

 

 

 

 

TTL

i-TTL mode. Menu of flash compensation values

 

 

 

 

 

 

 

 

 

—

Built-in flash does not fire, but AF-assist illuminator

 

 

will be displayed; choose value between +3.0 and

 

 

lights. Built-in flash must be raised to allow monitor

 

 

–3.0 EV in steps of 1/3 EV.

 

 

preflashes to fire. d is not displayed in control

 

 

 

 

 

 

AA

Auto aperture (not available with optional SB-600

 

 

panel flash-sync mode display.

 

 

 

 

 

and SB-R200 Speedlights). Menu of flash

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

compensation values will be displayed; choose

 

 

 

 

 

 

 

 

 

value between +3.0 and –3.0 EV in steps of 1/3

 

 

 

 

 

 

 

 

 

EV.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M

Choose flash output level for flashes in group B

 

 

 

 

 

 

 

 

 

from values between full power and 1/128 power

 

 

 

 

 

 

 

 

 

(1/128 of full power).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

—

Flashes in group B do not fire.

 

 

 

 

 

 

 

 

 

 

[CH]

Choose from channels 1–4. All Speedlights in both groups must be set to same channel.

162