How to use the SET UP menu (➝p.138)

When the camera establishes communication with a GPS

device, a icon will be displayed in the control panel. The exposure meters will not turn off while this icon is displayed. Photo information for pictures taken while the icon is displayed will include an additional page recording the current latitude, longitude, altitude, and Coordinated Universal Time (UTC). If no data is received

from the GPS unit for two seconds, the icon will clear from the display and the camera will stop recording GPS information. Also, the auto power save function will not be performed while the camera is communicating with a GPS device.

MEMO

•UTC data is provided by the GPS device and is independent of the camera clock.•GPS data is only recorded when the icon isdisplayed. Confirm that the icon is displayed in the

control panel before shooting. A flashing icon indicates that the GPS device is searching for a signal;

pictures taken while the icon is flashing will not include GPS data.

SHOOTING SPEED

Choose the rate (2 frames/s or 1 frame/s) at which pictures can be taken in continuous low-speed mode.

MEMO

The frame advance rate may drop at slow shutter speeds and at [ D-RANGE] setting other than [100% (STD)].

EXPOSURE DELAY MODE

Select [ON] to delay shutter release until about 0.4 s after the shutter button is pressed, reducing camera shake in situations in which the least camera movement could result in blurred photographs (for example, microscope photography).

SELF-TIMER

See p.101 for details.

QUICK PREVIEW DATA

Normally, select [ON] to playback images quickly in the LCD monitor (or [OFF] to playback images slowly). With any software application, If you encounter some difficulties with playback or printing of images with [ON] selected, select [OFF].

Settings

149