FujiFilm FinePix S9100, S9600 PHOTOGRAPHY MODETAKING PICTURES (AUTO MODE), BASIC OPERATION GUIDE, Zoom ring, Focus ring, Macro button, h Focal range, Flash pop-upbutton

BASIC OPERATION GUIDE

PHOTOGRAPHY MODE TAKING PICTURES (AUTO MODE)

Focus ring

The camera focuses on the subject using Manual focus mode.

Zoom ring

Turn the zoom ring to take pictures with zoom function.

Flash pop-up button

To use the flash, press the flash pop-up button to release the flash.

INFO (information check) button

Press this button to view image information.

Photography mode: Displays the current settings (white balance, sharpness, etc.) and histogram.

Playback mode: Displays the information for the image currently displayed.

1 01	02	1 Set the Power switch to “q”.
		2 Set the Mode dial to “B”.
		3 Set the Focus mode selector switch to “S-AF”.
		h Focal range
		Wide-angle: approx. 40 cm (1.3 ft.) to infinity
		Telephoto: approx. 2 m (6.6 ft.) to infinity
30		●! Use Macro mode for subjects closer than 50 cm (1.6 ft.)
		(➡P.50).
		●! When [CARD ERROR], [CARD NOT INITIALIZED], [CARD
		FULL] or [NO CARD] appears, see P.142.

One-touch AF button

Focus the image once. This can only be used for manual focusing.

Focus mode selector switch

Changes among C-AF (Continuous AF), S-AF (Single AF) and MF (Manual focus).

Macro button
Use this for close-up shots. Pressing this button changes the modes as follows:
Macro	Super macro		Macro off (Normal)
Focal range: Normal		Wide-angle: approx. 40 cm (1.3 ft.) to infinity
		Telephoto: approx. 2 m (6.6 ft.) to infinity
	Macro	Wide-angle: approx. 10 cm to 3 m (3.9 in. to 9.8 ft.)

2

3 Diopter adjustment dial

EVF

Press the Flash pop-up button to pop up the flash.

●! When the flash pops up, the image may disappear and go dark briefly due to flash charging. The indicator lamp blinks orange during charging.

●! If the flash is used in dusty conditions or when it is snowing, white dots may appear in the image due to flash reflecting off the dust particles or snowflakes. Use Suppressed flash mode to fix the problem.

Press the “EVF/LCD” button to alternate the display between the viewfinder (EVF) and the LCD monitor.

When the AF frame in the viewfinder (EVF) is difficult to see, adjust the viewfinder using the Diopter adjustment dial.

2

Camera the Using

	Telephoto: approx. 90 cm to 3 m (3.0 ft. to 9.8 ft.)
	Super macro Approx. 1 cm to 1 m (0.4 in. to 3.3 ft.) (Wide-angle only)
◆ Displaying the on-screen Help ◆
Instructions for the next step in the procedure
appear at the bottom of the screen. Press the				E R A S E O K ?
button indicated.
		Y E S	C A N C E L
In the right side screen, press the “MENU/OK”
button to erase the displayed frame. To cancel
erasing, press the “DISP/BACK” button.				Y E S	C A N C E L

LCD	The EVF/LCD selection is retained even when the
	camera is off or the mode setting is changed.

22 Continued 23