FujiFilm FinePix S9100, S9600 6.3CONNECTING TO A PC, Camera operation, 6.3 CONNECTING TO A PC, 6.3.1Connecting to a PC, ¶DSC (Mass storage device) mode

6.3CONNECTING TO A PC6.3.1Connecting to a PC

The “Connecting to a PC” section explains how to connect the camera to your PC using the USB cable (mini-B) and describes the functions you can use once the camera and PC are connected.

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the AC power adapter when connecting the camera to a PC.

Refer to Section 5 the first time you connect the camera to your PC.

Install the software first. Do not connect the camera to the PC before installing all the software.

CD-ROM

(Software for FinePix CX)

¶DSC (Mass storage device) mode

This mode provides a simple way to read images from a media and store images onto a media.

1	Insert the media into the camera.
	Gold
	contact
	area
	Gold marking

2 01		1Set the Power switch to “w” to turn the camera
		on.
		2Select “¶” DSC in “ò” USB MODE in the
		“˜” SET-UP menu (➡P.100).
		3Turn the camera off.
02		DSC
1	: OK
	: SET	●! Use the AC Power Adapter AC-5VX (sold separately) for the
2
	: SET	connection (➡P.121). If shutting off power supply during
3	: ENGLISH
		communication, the files on the media may be damaged.
	: SET
4		●! If inserting an xD-Picture Card and a CF/Microdrive into the
	:
		camera at the same time, images will be recorded onto the
		media selected as the “¡” MEDIA (➡P.100).

126

6.3 CONNECTING TO A PC

3	Camera	PC	PC on.
			the camera to the PC using the USB
			-B).
	USB socket		the USB cable (mini-B) is connected correctly
			.
4			Set the Power switch to “w”.

Camera operation

hWhen the camera and PC are exchanging data, the indicator lamp blinks orange.

h“¶DSC” appears on the screen.

hAuto power off is disabled during USB connection.

●! Before replacing the media, always disconnect the camera from the PC. See P.129 for information on the disconnection procedure.

●! Do not disconnect the USB cable (mini-B) when the camera is communicating with a PC. See P.129 for information on the disconnection procedure.

◆ When displaying [COMMUNICATION ERROR] ◆
CHECKING USB	If “CHECKING USB” appears and then
	[COMMUNICATION ERROR] is displayed on the
PICTBRIDGE	screen, “¶” (DSC mode) is not selected in “ò”
	USB MODE. Disconnect the USB cable (mini-B) to
	the camera and restart the procedure from step 1.

6

Images Viewing

Continued 127