FujiFilm FinePix S9100, S9600 5.5 INSTALLATION ON A Mac OS X (Hyper-Utility2)

5.5 INSTALLATION ON A Mac OS X (Hyper-Utility2)

Hardware and software requirements

To run this software, you must have the hardware and software described below. Check your system before you begin the installation.

Compatible Mac✽1	Power Mac G4 (except for PCI Graphic)/G5, PowerBook G4/MacBook,
	MacBook Pro/Mac mini
Operating System	Mac OS X (compatible with version 10.3 to 10.4.6) ✽2
RAM	256 MB minimum (512 MB or more recommended)
Hard disk space	Amount required for installation: 100 MB minimum
	Amount required for operation: 1 GB minimum
Display	1024 ⋅ 768 to 3840 ⋅ 2400 pixels, Thousands color or higher (1600 ⋅
	1200 pixels, Millions Color recommended)
Sound functions✽3	Speakers
CD-ROM drive	Required for software installation
Interface✽4	FireWire 400 (IEEE 1394) interface

✽1 PowerPC, Intel processor loaded

✽2 This software will not run correctly in the Mac OS X Classic environment. ✽3 Sound functions are required to play background music for slide shows.

✽4 Required to connect the FinePix S2 Pro, FinePix S3 Pro or FinePix S20 Pro and use the Remote Shooting function.

Installing Hyper-Utility2

1 Switch your Macintosh on and start up Mac OS X. Do not launch any other applications.

Load the enclosed CD-ROM into the CD-ROM drive. The “HS_V2” window opens.

2 ●! If the “HS_V2” window does not open automatically, double-click the CD-ROM icon.

3 Double-click “Installer”.

A confirmation message appears asking

4 whether you want to continue with the installation. Click the [OK] button.

Enter the administrator name and password.

5 Then click the [OK] button.

6 The installer setup window appears.

7 Click the [Continue] button.

5

Installation Software

118 Continued 119