SET-UP

✽ How to use the SET-UP menu (➡P.98)

ãPLAYBACK VOLUME
êADJUSTING SCREEN BRIGHTNESS

0 1 2 3 4 5 6 7 8 9 1 0

SET CANCEL

01 02

Adjust volume while playing back movie and voice memo.

1Press “d” or “c” to adjust the volume. The larger the number, the larger the volume is emitted. “0” indicates a sound deadening.

2Press the “MENU/OK” button to confirm the new setting.

- 5 4 3 2 1 0 1 2 3 4 5 +

SET CANCEL

01 02

To adjust screen brightness:

1Press “d” or “c” to adjust the screen brightness.

2Press the “MENU/OK” button to confirm the new setting.

éFRAME NO.

<CONT. > < RENEW >

Specifies whether frame numbers are assigned consecutively from previous numbers or begin again.

≤CCD-RAW

Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received from the CCD as an image) performed on the camera. Consequently, this task must be performed on the PC.

A

0001 0001

0005 0005

CONT.: Pictures are stored beginning from the highest file number stored on the last media used.

Conversion using FinePixViewer also provides a simple way to create TIFF-format images. Conversion using Hyper-Utility2 also provides you to specify parameters such as image format, tone, white balance, sharpness, saturation, and brightness during file conversion.

B

0006 0001

0010 0005

RENEW: Pictures are stored on each media beginning with a file number “0001”.

Setting this function to “CONT.” makes file management easier as it makes sure that file names are not duplicated when images are

✽To rebuild images, FinePixViewer (on the bundled CD-ROM “Software for FinePix CX”) or Hyper-Utility2 (on the bundled CD-ROM “Hyper-Utility Software HS-V2”) must be installed on your PC.

■The functions listed below cannot be used in CCD-RAW mode.

Formatted media used for both A and B.

downloaded to a PC.

●! When the camera settings are “úRESET”, the frame number setting (“CONT.” or “RENEW”) is changed to “CONT.” and the frame number itself does not return to “0001”.

●! When the media already contains image files with file numbers higher than the highest file number on the last media, images are stored beginning from the highest file number on the current media.

100-0001

 

Check the file number by viewing the image. The

 

last 4 digits of the 7-digit number in the top right

 

 

 

 

 

 

 

 

 

 

 

 

corner of the screen are the file numbers, while the

Directory number

 

 

 

first 3 digits show the directory number.

File number

●! When changing the media, always turn the camera off before

Frame number

opening the slot cover. Opening the slot cover without turning

 

 

 

 

 

 

6/24/2006 10:00 AM

the camera off may cause the frame number memory to not

function.

 

 

 

 

 

 

 

 

 

 

 

 

●! File number runs from 0001 to 9999. Once 9999 is exceeded,

 

 

 

 

 

 

 

 

 

 

 

 

the directory number changes from 100 to 101. The

 

 

 

 

 

 

maximum number is 999-9999.

 

 

 

 

 

 

●! The displayed frame number may differ for images

 

 

 

 

 

 

photographed on other cameras.

 

 

 

 

 

 

●! When [FRAME NO. FULL] appears, see P.142.

 

 

4

During playback

Playback can be zoomed up to 2.5⋅, but cropped images cannot be saved.

 

 

 

Settings

 

 

102

103