Outer casing
ATTACHING THE STRAP, LENS CAP AND LENS HOOD

01

Attaching the lens hood

When attaching the lens hood, it is effective for reducing ghost images and flare in backlit scenes. Camera provides crisp, clear shots.

1Align the indicators on the camera and lens hood, and fit the lens hood to the lens.

●! The lens hood cannot be attached when the optional wide- angle conversion lens is used.

02

2Turn the lens hood clockwise until it clicks.

 

◆ Storing lens hood ◆

As in storing lens hood into the soft case, the lens hood can be attached upside down.

12

LOADING THE BATTERIESCompatible batteries

hAA-size alkaline batteries (4) or AA-size Ni-MH rechargeable batteries (4) (sold separately)

●! Use the same brand and grade AA-size alkaline batteries as those supplied with the camera.

◆ How to use the batteries ◆

hNever use the following types of batteries, as they could cause serious problems such as battery fluid leakage or overheating:

1. Batteries with split or peeling outer casings

2.Combinations of different types of batteries or new and used batteries together

hDo not use manganese or Ni-Cd batteries.

 

hSoil, such as fingermarks on the poles of the batteries can shorten time for which the batteries

1

 

can be used.

hThe time for which AA-size alkaline batteries (referred to hereafter simply as alkaline batteries)

 

can be used varies depending on the brand. Some brands of alkaline batteries may stop providing

Getting

 

power more quickly than those supplied with the camera. Note also that due to their nature, the

 

 

 

time for which alkaline batteries can be used decreases in cold conditions (0°C to +10°C/+32°F to

 

 

+50°F). The use of AA-size Ni-MH batteries is better for this reason.

Ready

hUse Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries.

 

hSee P.137-138 for other notes on using batteries.

 

hWhen first purchased or if left unused for a long period, the amount of time which AA-size

 

 

Ni-MH batteries can be used may be short. See P.138 for more information.

 

1

Check that the camera is turned off (set the Power

 

switch to “OFF”) before opening the battery cover.

 

 

 

 

●! If opening the battery cover while the camera is still on, the

 

 

camera will turn off.

 

 

●! Do not apply force to the battery cover.

 

 

Do not open the battery cover while the camera is

 

 

on. This could damage the media or ruin the image

 

 

files on the media.

 

2

Load the batteries correctly as indicated by the

 

polarity icons.

 

 

 

Press on the battery cover to push the batteries

3down.

Slide the cover closed.

13