FujiFilm FinePix S9100, S9600 Disconnecting the printer, 6.2CONNECTING THE CAMERA DIRECTLY TO THE PRINTER — PictBridge FUNCTION

6.2CONNECTING THE CAMERA DIRECTLY TO THE PRINTER — PictBridge FUNCTION

6.2.2 Specifying images for printing without using DPOF (single-frame printing)

5

01 0203

1Press “d” or “c” to display the frame (file) for which you want to specify PRINT settings.

1 10 30

02 PICTBRIDGE

1 : OK

: SET

2 : SET

3 : ENGLISH

4	: SET
	:
2	USB socket
	(mini-B)

AC-5VX

3	CHECKING USB
	PICTBRIDGE

1Set the Power switch to “w” to turn the camera on.

2Select “®” PICTBRIDGE in “ò” USB MODE in the “˜” SET-UP menu (➡P.100).

3Set the Power switch to “OFF” to turn the camera off.

●! Do not connect to a PC when the “ò” USB MODE setting is set to “®” PICTBRIDGE. See P.146 if you connect to a PC by mistake.

1Connect the camera to the printer using the USB cable (mini-B).

2Turn the printer on.

●! The camera cannot be used to specify printer settings such as the paper size and print quality.

●! Please connect the AC Power Adapter AC-5VX (sold separately) to your camera.

●! Use a media that was formatted on FinePix S9100 / FinePix S9600.

Set the Power switch to “w”.

“CHECKING USB” appears and then the menu is displayed on the screen.

●! If the menu does not appear, check whether the “ò” USB MODE setting is “®” PICTBRIDGE.

●! Depending on the printer, some functions are disabled.

6

7

TOTAL:00009

01 SHEETS

FRAME

YES CANCEL

PRINT OK?

TOTAL:9SHEETS

YES CANCEL

PRINTING

1/9SHEETS

CANCEL

2Press “a” or “b” to set a value up to 99 as the number of copies of the frame (file) to be printed. For frames (files) that you do not want printed, set the number of prints to 0 (zero).

To specify more PRINT settings, repeat steps 1 and 2.

3Always press the “MENU/OK” button after the settings are completed.

●! Movies and images with CCD-RAW cannot be printed.

●! Images photographed with a camera other than FinePix S9100 / FinePix S9600 may not be printed.

“PRINT OK?” appears on the screen. Press the “MENU/OK” button to begin printing.

Printer starts printing the specified number of prints.

●! Press the “DISP/BACK” button to cancel the printing. Depending on the printer, the printing may not be canceled immediately or printing may stop midway through. When printing stops midway, briefly turn the camera off and then on again.

4	01	20	1Press “a” or “b” to select “PRINT WITH DATE”
			or “PRINT WITHOUT DATE”. If “PRINT WITH	Disconnecting the printer
			DATE” is selected, the date is imprinted on your
			prints.		1Check that “PRINTING” is not displayed on the
			2Press “c”.	USB socket	camera’s screen.
	PICTBRIDGE				2Turn the camera off. Unplug the USB cable
				(mini-B)
					(mini-B).
	PRINT WITH DATE		OK
	PRINT WITHOUT DATE
	PRINT DPOF

●! “PRINT WITH DATE” is not available when the camera is connected to a printer that does not support date printing.

124

6

Images Viewing

125