FujiFilm FinePix S9100, S9600 INSERTING THE MEDIA, Checking the battery charge, Card, Card, Card, xD-Picture, xD-Picture, xD-Picture, xD-PictureCard, ◆ How to replace, ◆ How to replace

INSERTING THE MEDIA

Use either xD-Picture Card (sold separately) or CF/Microdrive (sold separately) as recording media in the FinePix S9100 / FinePix S9600.

h If an xD-Picture Card and a CF/Microdrive are inserted at the same time, images will be recorded onto the media selected as the “¡” MEDIA (➡P.100).

h Data cannot be copied between the two media types on the FinePix S9100 / FinePix S9600.

1 01	1Set the Power switch to “OFF”.
	2Open the slot cover.

20

●! If opening the slot cover while the camera is still on, the camera will turn off.

Do not open the slot cover while the camera is on. This could damage the media or ruin the image files on the media.

2	xD-Picture Card	CF/Microdrive
	Gold
	contact
	area
	Gold marking
	Align the gold marking on the xD-Picture	Push the CF/Microdrive firmly all the way
	Card slot with the gold contact area on	into the CF/Microdrive slot.
	the xD-Picture Card and push the card	Compatibility is listed on Fujifilm website:
	firmly all the way into the slot.	http://www.fujifilm.com/products/digital/

●! Insert only the appropriate media types into the xD-Picture Card and CF/Microdrive slots. Inserting the incorrect media will damage the camera or media.

●! If the media is oriented incorrectly, it will not go all the way into the slot. Do not apply force when inserting an xD-Picture Card or a CF/Microdrive.

●! If the media is not fully inserted into the slot, [CARD ERROR] appears.

3 Close the slot cover.

14

◆ How to replace	◆ How to replace
the xD-Picture Card ◆	the CF/Microdrive ◆

		CF / Microdrive eject button
Push the xD-Picture Card into the slot and		Open the slot cover, press the CF/Microdrive
then slowly remove your finger. The lock is		eject button and remove the CF/Microdrive.	1
released and the xD-Picture Card is pushed		●! When storing CF/Microdrives, always use the
out.
		special protective case.
Checking the battery charge			Getting
Turn the camera on and check the battery charge.			Ready
		1There is ample battery charge.
1 No icon		2There is insufficient charge left in the batteries.
		The batteries will soon run out. Have a new set
2	Lit red	of batteries ready.
		3The batteries are depleted. The display will
3		shortly go blank and the camera will stop
	Blinking red	working. Replace or recharge the batteries.
	N 6	“C” appears as a small icon on the left-hand side
		of the screen. “V” appears as a large icon in the
Lit red		center of the screen.
	Blinking red

●! Depending on the camera mode and the type of batteries used, the transition from “C” to “V” may occur more quickly.

●! Due to the nature of the battery, the battery level warning may appear early when the camera is used in cold locations. This is normal. Try warming the batteries in your pocket or a similar location before use.

✽Battery level warning

1)The camera’s estimation of the remaining battery charge varies greatly depending on the camera operation mode. Consequently, even if “C” or “V” is not displayed in Playback mode, one of them may appear when you change to Photography mode.

2)Depending on the battery type and the level of charge in the batteries, the camera may run out of power without first displaying a battery level warning. This is particularly likely to happen when batteries that have run out of charge once are re-used.

In situation 2), immediately load new or fully charged replacement batteries.

◆Auto power off function ◆

If the camera is left unused for 2 or 5 minutes, the Auto power off function turns the camera off (➡P.104). To turn the camera back on, set the Power switch to “OFF” briefly and then back to “q” or “w”.

15