USING SETUP MODE
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG
Items Options Description
<TEARPOS> Tearoff position.
VISIBLE e
a
Select this option when your softwar
positions forms to the next top-
ofform after printing the last data.
The printer performs tearoff feed
without adding a form feed when dat
transfer has stopped.
ALWAYS ware
e
setting does not match the
actual perforation spacing.
Select this option when your soft
stops after printing the last data. Th
printer performs tearoff feed after
adding a form feed when data transfer
has stopped.
Note: For both settings, tearoff
positioning will fail if the page
length
The following <TEAR-EN> item is printed when TEAROFF:AUTO is
ecified for the < tesp TEAROFF> i m.
<TEAR-EN> led time (offset time). Tearoff enab
0 SEC
1 SEC
2 SEC
4 SEC
6 SEC
en data
transfer stops to when the printer
eed.
in
t time, the printer
erform automatic tearoff
fee
The offset time is from wh
performs automatic tearoff f
If the printer receives data aga
within the offse
does not p
d.
User's Manual 5-39