COMMAND SETS (IBM XL24E)
Function Command
Change graphics line spacing base to
1/216 or 1/180 inch (for ESC J and ESC 3)
m1 = 4, m2 = 0
0 < t1 < 255, 0 < t2 < 255, t3 = 0
t4 = 180 or 216
ESC [ \ (m1) (m2)
(t1) ... (t4)
Tabulation
Horizontal tab execution
Set horizontal tabs
The values of n1 to nk in this command
are the ASCII values of the print columns
(at the current character width) at which
tabs are to be set. (1 < n< 255) (1 < k < 28)
Clear all horizontal tabs
Move print position right by n/120 inch
(0 < n1, n2 < 255) (n = n1 + n2 × 256)
Vertical tab execution
Set vertical tabs
The values of n1 to nk in this command
are the ASCII values of the lines (at the
current line spacing) at which tabs are to be
set. (1 < n < 255) (1 < k < 64)
Clear all vertical tabs
Reset tabs to default values
HT
ESC D (n1)...
(nk) NUL
ESC D NUL
ESC d (n1)(n2)
(nk) NUL
VT
ESC B (n1)...
ESC B NUL
ESC R
Page Formatting
Set left margin at column n and right
margin at column m (0 < n, m < 255)
Set perforation skip by n lines
(1 < n < 255)
Perforation skip off
Set page length to n lines (1 < n < 255)
Set page length to n inches (1 < n < 22)
Set top of form
ESC X (n) (m)
ESC N (n)
ESC O
ESC C (n)
ESC C NUL (n)
ESC 4
C-24 User's Manual