INSTALLING OPTIONS
To continuously stack cut sheets or eject long cut sheets to the rear,
mount the large stacker.
INSTALLING THE
LARGE STACKER
Also, if a cut sheet feeder is mounted at the rear, the stacker must be
replaced with the large stacker even if cut sheets need not be
continuously stacked.
1 Removing the current stacker
1. Lift up the current stacker in the direction indicated by the arrow.
2. With the stacker in the condition described in step 1, push out
the right and left stacker frames to separate them from the
protrusions on the stacker plate.
User's Manual 8-9