USING SETUP MODE
This reset the printer’s power-on defaults, all of
the facto
MENU2
Reset
ower-on defaults are the settings saved in the printer’s permanent
memory. The defaults are enabled whenever you turn the printer on.
and then on again. This method is useful if you have made changes in
tup mode that you do not want to save.
Re t
Factory
the print
Options
function
2. h
printer beeps.
e.
DEFAULT.
Resetting Factory Defaults in MENU1 and ME
This defaults for MENU1 and MENU2 options,
liste oes not reset the printer hardware, print position
n

RESETTING

DEFAULTS

section describes how to
ry defaults, or the factory defaults only for MENU1 and
.
ting Power-On Defaults
P
The easiest way to reset the power-on defaults is to turn the printer off
se
se ting Factory Defaults
defaults are those settings preselected at the factory. For a list of
er’s factory defaults, see the section Printing a List of Selected
earlier in this chapter. To reset the factory defaults for all
s, proceed as follows:
1. Turn off the printer.
W ile pressing the LOAD and, TEAR OFF buttons, turn on the
printer. Continue to press the two buttons until the
The factory defaults are now reset.
Another available method is to select INITIAL in SETUP mod
The method of making settings is the same as the method for
selecting DEFAULT on the next page, except that INITIAL
must be selected instead of
NU2
method resets factory
d in Table 5.3, but d
adjustment, and configuration options. To reset the factory defaults i
MENU1 and MENU2, proceed as follows:
User's Manual 5-51