PRINTER AND PAPER SPECIFICATIONS
SPECIFICATIONS Print method Impact dot matrix with a 0.2 mm, 24-wire head
Print direction Bidirectional logic-seeking or unidirectional
seeking
Character cell Horizontal × vertical
Letter (10 cpi): 36 × 24 dots
Letter (12 cpi): 30 × 24 dots
Report: 18 × 24 dots
Draft: 9 × 24 dots (MODE 1)
12 × 24 dots (MODE 2)
High-speed draft: 9 × 24 dots
Paper handling
Standard: Friction-feed platen (cut sheets)
Convertible bi-directional tractor on front or
rear
Paper loading by LOAD button Advancing
perforations to tear-off edge by TEAR OFF
button
Parking continuous forms when using cut sheets
Optional: Cut sheet feeder
Tractor unit
Paper type 1 to 5-copies for cut sheet feeder
1 to 8-copies for tractor and paper table
Paper size
Continuous Width: 102-420 mm (4-16.5 in)
Length: 102 mm (4 in) or greater
Cut sheets
(Paper table)
Width: 55-420 mm (2.16-16.5 in)
Length: 70-420 mm (2.76-16.5 in)
(Cut sheet feeder)
Width: 100-420 mm (4-16.5 in)
Length: 70-420 mm for front cut sheet feeder
(2.76-16.5 in)
100-420 mm for front cut sheet feeder
(4-16.5 in)
Note:
To use cut sheets exceeding 297 mm in length, the optional large cut
sheet table and large stacker are required.
B-2 User's Manual