Manual Feed Mode Setting

In this mode, the scanner waits for some predetermined time before issuing a “Paper Empty” message after all documents are read. This predetermined time (time-out limit) is specified in the Setup mode. Therefore, you can set the next documents on the ADF chute without interrupting the reading operation. The procedures for setting the manual feed mode are as follows:

<Screen M1>

1Turn the power On and verify that “Scanner

Ready” is displayed on the LCD.

<Screen M2>

2Press then the scanner displays

Screen M2.

<Screen M3>

3Press then the scanner displays

Screen M3.

<Screen M4>

4Press then the scanner displays

Screen M4.

5Select “Yes” by pressing . Then press .

<Screen M1>

6Press to return to the “Scanner Ready”

screen. Note that “Manual Feed” is shown on the LCD. This means that the scanner is in Manual Feed mode.

3-3