NOTICES

Note the following when preparing the paper.

• Remove paper clips and staples. Flatten the staple holes.

Read the following documents using the Flatbed:

-Paper with clips or staples.

-Paper written on with wet ink.

-Paper of uneven thickness (for example, envelopes).

-Paper with large rumples or curls.

-Paper with folds or tears.

-Tracing paper.

-Coated paper.

-Carbon paper.

-Paper smaller than A8 (portrait) size or wider than A3 size.

-Materials other than paper (for example, clothes, sheet metal, or OHP film).

-Photographic paper.

-Paper with perforations on the side.

-Non-rectangular paper.

-Very thin paper.

Set documents on the ADF so that the curl of the leading edge does not exceed the measures shown below.

More than 30mm

Feed direction

More than 30mm

 

Feed direction

Less than

Less

than

3mm

5mm

 

 

 

Top of the paper

Read surface

Read surface

 

 

Top of the paper

• To avoid skewing, do not feed docments of different widths during the same batch.

3 Adjust the stacker extension to the

ADF paper chute

paper size, and then flip out the plate.

 

Stacker

3-6