Fujitsu fi-4750C 41

4 Set the guides so that there is a small clearance between the document edges and the guides. Load the document face down on the ADF paper chute and adjust the guides to the document width.

Documents

Guide

Guide lever (Both sides)

NOTICES

•Squeeze the guide lever to free the guides.

•Do not load document stacks thicker than 8 mm.

•Set the guides so that they touch the document sides.

max. 8 mm (0.32")

5 After the read command is issued from the host system and the documents are read, scanned documents are expelled into the stacker for removal.

3-7

Contents

fi-4750CImage Scanner fi-4750CImage Scanner Revisions, Disclaimers Page Fujitsu Offices Note, Liability Preface Conventions CONTENTS ❑CHAPTER 1 COMPONENTS ❑CHAPTER 2 INSTALLATION AND CONNECTIONS ❑ CHAPTER 3 OPERATING INSTRUCTION ❑CHAPTER 4 ADF DOCUMENT SPECIFICATION Page Page CHAPTER Checking the Components Units and Assemblies Operator Panel Checking the Components Units and Assemblies Units No Part Function Assemblies Operator Panel Arrangement Button/LED Function Counter Display Operation status Temporary error Alarm Page Page INSTALLATION AND CONNECTIONS Precautions Inspection Repositioning the Shipping Lock Cable Connections Precautions Inspection FUJITSU LIMITED Repositioning the Shipping Lock Cable Connections Turning the power switch Off Connecting the power cable Connecting the interface cables Mounting the Stacker Setting the SCSI ID and the SCSI Terminator Page OPERATING INSTRUCTION Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting Loading Documents on the ADF Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting Loading Documents on the ADF Page Page Page Loading Documents on the Flatbed Loading Documents Larger than the Document Bed Reading a Page from a Thick Book Page ADF DOCUMENT SPECIFICATION Document Size Document Quality ADF Document Feeder Capacity Areas not to be Perforated Document Size Document Quality Page ADF Document Feeder Capacity Areas not to be Perforated Grounding Color Areas Double Feed Detection Condition Job Separation Sheet SCANNER SPECIFICATIONS Basic Product Specification Installation Specification Dimensions Basic Product Specification Installation Specification Dimensions Page CONSUMABLES AND OPTIONS Consumables Options Video Interface Option IPC-4DOption Consumables Options Video Interface Option Reading Mode Setting When the Video Interface Option is Installed Without IPC With IPC-4D Description option Parameter Page IPC-4DOption Page SETUP MODE Activating the Setup Mode Contents of the Setup Mode Activating the Setup Mode Contents of the Setup Mode Page 1. Setting double feed detection (Paper Thickness) 2. Setting double feed detection (Paper Length) 3. Setting IPC pre-setmode 4. Reset of the abrasion counter 5. Setting the pick start time 6. Setting the time-outlimit 7.ADF Front Offset Setting 8.ADF Back Offset Setting 9.Flatbed Offset Setting Page 10. IPC Status Display 11. SCSI ID Setting 12. SCSI Terminator Setting 13. Low Power Mode Setting 14. Select Interface 15. Display the TPS Board ID Number 16. Select Built-In/IPC-4DImage Processing 17. Adjust ADF Erasing Edges 18. Adjust FB Erasing Edges 19. Select Light Source in Unicolor Reading 20. Line Enhance Mode setting Page GLOSSARY OF TERMS A4 size A5 size A6 size A7 size Double feed detection Double Letter Size dpi Dropout color Duplex reading mode Hexadecimal Image emphasis Image processing Interface Inversion (Reverse-imagereading) Mirror image Noise removal Operator panel Outline extraction PAPER JAM Serial interface SETUP mode Simplex reading mode Smoothing Temporary Error Page INDEX