Activating the Setup Mode

This section describes how to activate the setup mode.

<Screen M1>

1Turn the power On. Then the scanner displays “Scanner Ready” on the LCD.

<Screen M2>

2If the scanner does not have a video interface option, go to the procedure step 3.

Press then the scanner with the video interface option displays Screen M2.

<Screen M3>

3Press then the scanner displays

Screen M3.

<Screen M4>

4Press then the scanner displays

Screen M4.

5Press . Now the scanner is at Screen 41 (page 7-4) in Setup mode.

NOTICE

Any time you press , you can return to the “Scanner Ready” screen.

7-1