
<Screen 9>
12Select Back Halftone (when “Duplex” was
specified) by pressing or
. The parameters are the same as in step 11.
Press to confirm. The scanner displays Screen 10.
<Screen 10>
13Select Front Document Type by pressing
or
.
Parameter | Description | |
|
| |
L. (Line) | White level following is ON. Top 3mm part of the document must be left blank | |
(grounding color is | ||
| ||
|
| |
P. (Photo) | White level following is Off | |
Use this specification for reading photographs. | ||
| ||
|
|
Press to confirm. The scanner displays
Screen 11.
<Screen 11>
14Select Back Document Type (when “Duplex”
was specified) by pressing or
. The parameters are the same as in step 13.
Press to confirm. The scanner displays Screen 12.
<Screen 12 (Example)>
15Confirm what you have specified.
If some parameter needs to change, press
or |
| to select the corresponding | |
screen and |
| ||
pressing | or | and finally press | . |
If all parameters are acceptable, press | Density | ||
to return to the “Scanner Ready” screen. | Halftone |
Line Art or Photo
Resolution
Portrait or Landscape
Paper size
Front side (F) or Back side (B)
Simplex (S) or Duplex (D)
6-6