17. Adjust ADF Erasing Edges

<Screen 57>

1Press “Next” or “Previous” and let the

scanner display Screen 57.

2 At Screen 57, press or to select “Yes”

and press . Then the scanner displays Screen 57-1.

<Screen 57-1>

3At Screen 57-1, select “Yes” to return the

settings to the factory default or select “No” to make new settings (as shown below).

Then press . The scanner displays Screen 57-2.

<Screen 57-2>

4At Screen 57-2, press or to change the

top setting. The value changes in 1 mm

units. Then press to activate the setting. The scanner displays Screen 57-3.

<Screen 57-3>

5At Screen 57-3, press or to change the

bottom setting. With (+:Up), the area is set upward from the bottom edge of the image. With (–:Down), the area is set downward from the bottom edge of the image. The value

changes in 1 mm units. Then press to activate the setting. The scanner displays Screen 57-4.

<Screen 57-4>

6At Screen 57-4, press or to change the

left setting. The value changes in 1 mm

units. Then press to activate the setting. The scanner displays Screen 57-5.

<Screen 57-5>

7At Screen 57-5, press or to change the

top setting. The value changes in 1 mm

units. Then press to activate the setting. The scanner displays the next setup item.

7-13