
7.3 Replacing the Pick Roller
4. Rotate the Pick roller bushing (on the left side).
Pick roller | Pick roller bushing |
| Pick roller shaft |
5. Remove the Pick roller with its shaft.
Hold the left part of the shaft, and raise it to remove the shaft from the scanner while pulling the shaft to the left.
ATTENTION
Pick roller shaft
Pick roller
If the area around the Pick roller is contaminated by paper debris, it may cause scanning errors. Remove the dirt using a dry cloth moistened with Cleaner F1. * Do not use water, neutral detergent or aerosol spray.
7
Consumables Replacing
ScanSnap |
| 93 |
|