CONTENTS MAP
2.1 Turning the Scanner ON (6) Power Save ModeThe Power Save mode keeps the scanner in a
If no operation is performed on the scanner for 15 minutes, the scanner automatically switches to the Power Save mode. In the Power Save mode, the indication of the Function Number display on the operator panel goes out, but the green LED stays lit.
To return from the Power Save mode, perform one of the following:
●Load the document on the ADF paper chute.
●Press any button on the operator panel.
The scanner will be turned OFF when pressing down the power button for at least two seconds.
●Execute a command from the scanner driver.
All Rights Reserved Copyright