Fujitsu fi-5120C, fi-5220C Cleaning Materials, Locations and Cycle for Cleaning, fi-5120C / fi-5220CImage Scanner Operator Guide

fi-5120C / fi-5220C Image Scanner Operator Guide

CONTENTS MAP

4.1 Cleaning Materials and Locations requiring Cleaning Cleaning Materials

The table below shows the cleaning materials that are used on this scanner.

Cleaning Materials	Part No.	Remarks

Cleaner F1

1 bottle (100 ml)

PA03950-0352(*1) Moisten cloth with this fluid and wipe the scanner clean.

		24 sheets/pack
Cleaning Wipe	PA03950-0419	Pre-moistened with Cleaner F1, Cleaning Wipes are
		used instead of moistened cloths.

Soft, dry cloth	Commercially available.	Any lint-free cloth can be used.

*1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

For details on Cleaner F1, consult the agent where you bought your scanne or an authorized FUJITSU service providerr.

Locations and Cycle for Cleaning

Location	Standard Cleaning Cycle

Pad ASSY

Pick roller

Feed roller

Plastic roller	Clean every 1,000 scanned sheets.

Glass

Document holding pad

Document bed

ATTENTION

The scanner must be cleaned more frequently when the following documents are used:

●Documents of coated paper

●Documents with printed text or graphics almost covering the entire surface

●Chemically treated documents such as carbonless paper

●Documents containing a large amount of calcium carbonate

●Documents written by pencil

●Documents on which the toner is not fused sufficiently