Fujitsu fi-5120C, fi-5220C 3.8 Skipping blank pages (2)

fi-5120C / fi-5220C Image Scanner Operator Guide

CONTENTS MAP

3.8 Skipping blank pages (2)

1 2

3. Check the [Blank Page Skip] box.

If an item other than "Ram cache" or "Use Both Memory" has been selected in the [Cache Mode:] and this check box is marked, it will change to "Ram cache".

4.With the slider control under [Blank Page Skip], specify the Blank Page Skip degree. In Binary/Halftone mode

For white pages, use the [Black Dots Ratio] slider bar to set the skip condition. For black pages, use the [White Dots Ratio] scroll bar to set the skip condition.

The value displayed to the right of the scroll bar displays the noise ratio(*1). If a scanned document is below this value, it is recognized as a blank page. The setting range is OFF(- -) and 0.2% to 3.0% (in increments of 0.2%).

*1: Ratio of black dots included in the scanning area. (for white pages)

In Color/Grayscale mode

Use the slider bar to set the skip condition in five stages from 1 to 5. To make the blank pages easy to skip, increase the value of the setting.

1 2