Name

 

Function

 

 

 

 

 

 

 

 

Scan

 

Use this button to start linked applica-

 

 

 

 

 

tion.

 

 

 

 

 

When this button is pressed during

 

 

 

 

 

scanning operation, the scanning is

 

 

 

 

 

cancelled

 

 

 

 

 

(*About the settings, refer to the "fi-

 

 

 

 

 

5950 Operator’s Guide" on the SETUP

 

 

 

 

 

DVD-ROM).

 

 

 

 

 

 

 

 

 

 

 

Use this button to turn the power ON/

 

 

 

 

 

OFF.

 

 

 

 

 

 

 

 

 

 

When the power is turned on, the but-

 

 

 

 

 

ton is illuminated in blue.

 

 

 

 

 

 

 

 

 

 

Operator Panel Overlays are available in

HINT

French, German, Italian, Spanish, and Chi-

 

 

 

 

 

 

 

 

nese (Simplified). To change the overlay,

 

 

 

 

open the plastic cover.

Thin

Send to

Scan

■Indications on the Function Number Display

The following shows the indications on the Function Number Display.

No.Descriptions

Lights only one time upon turning on the scanner.

Indicates that the scanner has been turned ON and is being initialized.

Indicates that initialization has been completed successfully.

This status is called "Ready Status."

 

Indicates that a temporary error (that users can

 

solve) has occurred during the initialization or

 

scanning of documents.

or

"J" or "U" and an error number (1, 2, 4, 6, 8, 0)

are displayed alternately.

 

 

To return the scanner to the ready status ("1"),

 

press the "Scan" or "Send to" button while the

 

error is indicated.

Indicates that a device alarm (that users can not solve) has occurred during the initialization or scanning of documents.

"E" and an alarm number (0, 2 to 9, and A, c, d, F, 10 to 12, 15 to 19, 1A, 1b) are indicated alter- nately.

To return the scanner to the ready status ("1"), press the "Scan" or "Send to" button.

If this alarm occurs, turn the power off and then on again. If the alarm is indicated after turning on the power again, contact your service engineer.

3