Fujitsu fi-5950 ■Cleaning Materials, ■Cleaning Method, ■Locations and Cycle for Cleaning, AP-4, Appendix 2 DAILY CARE, Remarks, Cleaning, Parts No, Materials, Part to clean

Appendix 2 DAILY CARE

During its operation, the inside

￿￿￿￿￿￿￿ glass of the ADF becomes very hot. Before you clean inside the scan- ner, turn off its power and unplug the AC adapter from the outlet. Wait for at least 15 minutes.

Do not turn off the scanner when you clean the Feed rollers or Eject rollers.

ATTENTION

It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

■Cleaning Materials

Cleaning	Parts No.	Remarks
Materials
Cleaning sheet	CA99501-	20 sheets/pack
	0016	For the cleaning method,
		refer to "4 DAIRY
		CARE in the fi-5950
		Operator’s Guide.
Cleaner F1	PA03950-	1 bottle
	0352	Moisten a cloth with this
		fluid and wipe the scan-
		ner to clean.
Cleaning wipe	PA03950-	24 sheets per pack
	0419	(*1)(*2)
Cotton swab	Commercially available
Lint-free dry
cloth

*1: For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.

*2: Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of moistened cloths.

■Cleaning Method

The ADF and the Feed rollers must be cleaned with a lint-free cloth moistened with the Cleaner F1.

■Locations and Cycle for Cleaning

	Part to clean		Standard Cleaning Cycle
Pad			Clean these parts after every
			10,000 scans.
Pick rollers
Brake roller
Separator rollers
Feed rollers
Pinch rollers
Transport path
Glass
Skew-detection sensor
Document sensor
ATTENTION		The scanner must be cleaned more fre-
		quently if you scan any of the following

type of sheets:

•Documents of coated paper

•Documents that are almost completely covered with printed text or graphics

•Chemically treated documents such as carbonless paper

•Documents containing a large amount of calcium carbonate

•Documents written with pencil

•Documents on which the toner is not sufficiently fused

For details on the cleaning the ADF, refer to "4.DAILY CARE" in the fi-5950 Operator’s Guide on the SETUP DVD-ROM".

AP-4