Do not install the scanner in the following locations which are subject to high temperature, humidity, less ventilation, or dust. If placed in an area subject to high temperature, the cover may become overheated and deformed, causing the scanner to become hot, resulting in a fire.
•A place near
stoves or electric heaters, or flammable items such as volatile inflammable materials or curtain.
•A place such as a bathroom, shower room,
or swimming pool where it may easily get wet.
•A place under direct sunlight, in a car under
the scorching sun, or near heating apparatus where it may get hot.
To avoid injuries, do not place the scanner in an area where small children may be able to reach.
Before moving the scanner, be sure to disconnect the power cable from the AC outlet, and all other interface cables. Make sure that the floor is free of any obstructions.
Do not move the scanner with the power and interface cables connected as this can damage the cables, which can later cause a fire, electric shock as well as injuries.
Do not touch the power cable with wet hands. Doing so might cause an electric shock.
When removing the power cable from the AC outlet, make sure to hold the power plug and not the cable. Pulling the power cable may damage it, which may cause a fire or electric shock.
Do not use a damaged power cable. Also, do not insert any cables or power plugs into loose sockets. Doing so may cause a fire or electric shock.
Be careful of the following when handling the power cable:
•Do not modify the power cable.
•Do not place heavy objects on the power cable.
•Do not pull or bend the power cable.
If the power cable is damaged, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
vi
Do not place heavy objects on the scanner or perform other work on top of the scanner. Doing so might cause injuries or an equipment failure.
Do not use the scanner while covered with a blanket, etc. Doing so may raise the temperature inside and cause a fire.
Avoid getting a sleeve, necktie, or hair caught up in any scanner mechanism during scanning since this may cause injuries.
Do not touch the heated section such as the bottom of the scanner for a long time. Doing so may cause a
When the scanner is not going to be used for a long period of time, be sure to disconnect the power cable from the AC outlet. Not doing so may cause a fire or electric shock.
Do not use any aerosol sprays or alcohol based sprays to clean the scanner. Dust blown up by strong air from the spray may enter the inside of the scanner. This may cause the scanner to fail or malfunction. Sparks, caused by static electricity, generated when blowing off dust and dirt from the outside of the scanner may cause a fire.
Check the following items once a month:
•The power cable is firmly inserted into the AC outlet.
•The power cable is not emitting abnormal
heat, or the power cable is not rusted or bent.
•Dust is not accumulated on the power cable. If so, wipe off any dust with a soft, dry cloth.
•The power cable does not have any cracks
or scratches.
If any abnormality is detected, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
Make sure to ground to avoid electric shock. Be sure to ground before plugging into the AC outlet. Unplug from the outlet before removing the ground connection.