Chapter2 INSTALLATION OF THE SCANNER
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and required installation space, refer to the
ATTENTION | • The scanner weight is 50 kg (110 lb). |
| Make sure two persons are available |
| when moving the scanner. |
•When carrying the scanner, only grip the bottom side.
2.Connect the AC cable to the Power inlet of the scanner and plug it into an outlet.
2.2Connecting the Scanner to Your PC
Connect either using the USB or SCSI interface.
ATTENTION | This scanner is provided with two inter- |
| faces: Ultra SCSI and USB 2.0 /1.1. Con- |
| nect only one of the USB or SCSI cable. |
■Connecting the USB Interface
1. Connect the USB cable to the USB connector.
2.Connect the other end of the USB cable to your PC.
ATTENTION | • Be sure to use the USB cable which |
| comes with this scanner. Correct opera- |
| tion with commercially available cables |
| is not guaranteed. |
ATTENTION
HINT
Use only the power cable provided by the manufacturer.
The Function Number Display and the LED may flash for an instant when plugging the AC cable into the outlet. This is not a mal- function.
•When connecting to a USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not oper- ate correctly.
•If you connect the scanner with USB 2.0, it is required that the USB port and Hub are compliant with USB 2.0. The scan- ning speed may slow down if it is con- nected with USB1.1.
3.Press the "I" side of the main power switch to turn on the scanner.
OFF ON
4