Fujitsu fi-5950 2.4Checking Scanner Driver Operation, ■Checking the Operation of the Scanner Driver

2.4Checking Scanner Driver Operation

This section explains how to check the operation of the installed scanner driver by using ScandAll PRO. Make sure that the scanner driver is installed properly, following the procedure below.

■Checking the Operation of the Scanner Driver

1.Load the document on the scanner.

For information about how to load the document, refer to section "2.6 Loading Documents on the ADF for Scanning" in the "fi-5950 Operator's Guide."

2.Launch ScandAll PRO.

From the [start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [ScandAll PRO].

3.In ScandAll PRO, select [Tool] on the menu, and then select [Preferences].

⇒The [Setup] dialog box appears.

4.On the [Scan] tab, select a driver.

To check the operation of TWAIN driver, select [TWAIN].

To check the operation of the ISIS driver or Kofax VRS, select [ISIS/VRS].

5.Click the [OK] button to close the [Setup] dialog box.

6.In ScandAll PRO, select [Scan] on the menu, and then select [Select Scanner].

7.Select a scanner in the displayed dialog box.

To use TWAIN driver:

Select [FUJITSU fi-5950d], and then click the [Select] button.

To use ISIS driver:

Select [Fujitsu fi-5950], and then click the [Select] button.

To use Kofax VRS:

Select [Kofax VRS Scanner], and then click the [Select] button.

8.Select [Scan] on the menu, and then select [Scan Settings].

9.In the [Scan Settings] dialog box, clear the [Save to file] checkbox.

		You only check the operation now, so you do
		You only check the operation now, so you do
HINT		not have to save to file.