Symptom

Check this item

Remedy

 

 

 

Paper is not fed (pick error

Do the documents satisfy the "Docu-

Use the documents that satisfy the "Document

occurs frequently, or docu-

ment Quality" and the "Multifeed Detec-

Quality" and the "Multifeed Detection Condi-

ment stops midway).

tion Conditions" in the chapter 7 of the

tions" in chapter 7 of the fi-5950 Operator’s

 

fi-5950 Operator’s Guide?

Guide.

 

 

 

 

Are the Separator roller or the Pick roll-

Clean the Separator roller or the Pick rollers.

 

ers dirty?

Refer to the fi-5950 Operator's Guide "4. DAILY

 

 

CARE".

 

Are the Separator roller or the Pick roll-

Replace the Separator roller or the Pick rollers.

 

ers worn out?

Refer to the fi-5950 Operator's Guide "5.

 

 

REPLACEMENT OF CONSUMABLES".

 

 

 

 

Is there any debris on the document feed

Remove any debris from the document feed path.

 

path?

 

 

 

 

 

Have you set the Paper Thickness on the

Set the Paper Thickness thinner.

 

Operator panel?

Refer to "1.3 Operator Panel" (page. 2).

 

 

 

The generated images are

Are the Feed rollers or the Pinch rollers

Clean the Feed rollers or the Pinch rollers. Refer

elongated.

dirty?

to the fi-5950 Operator's Guide "4. DAILY

 

 

CARE".

 

 

 

 

Have you adjusted the Vertical Magnifi-

Start up the Software Operation Panel, select

 

cation?

[Device Set] and then click the [Offset] button.

 

 

Adjust the vertical magnification. Refer to the fi-

 

 

5950 Operator's Guide "8.3 Offset/Scan scale".

 

 

 

There is a shadow on the

Have you adjusted the offset (the scan-

Start up the Software Operation Panel, select

leading edge of the gener-

ning starting position)?

[Device Set] and then click the [Offset] button.

ated image.

 

Adjust the offset setting. Refer to the fi-5950

 

 

Operator's Guide "8.3 Offset/Scan scale".

AP-2