Fujitsu fi-5950 Appendix 3 REPLACING CONSUMABLES, ■Consumables and Replacement Cycle, ■Pad, AP-5

Appendix 3 REPLACING CONSUMABLES

	During its operation, the inside
￿￿￿￿￿￿￿	glass of the ADF becomes very
	hot.
	Before replacing the
	consumables, turn its power off
	and unplug the AC adapter from
	the outlet. Wait at least

15minutes.

■Consumables and Replacement Cycle

The followings are the specifications of consumables and their recommended replacement cycles.

The following illustrations show the locations of the consumables. Refer to "5. REPLACEMENT OF CON- SUMABLES" in the fi-5950 Operator’s Guide on the

SETUP DVD-ROM.

Pick roller Separator roller

Pad

Brake roller

Description	Parts No.	Standard
		Replacement Cycle
Pad	PA03450-	After 600,000 scans or
	K014	one year
Pick rollers	PA03450-	After 600,000 scans or
	K011	one year
Brake roller	PA03450-	After 600,000 scans or
	K013	one year
Separator	PA03450-	After 600,000 scans or
rollers	K012	one year

To purchase consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.

The replacement cycles above are rough guidelines

when scanning A4/Letter sized, 80 g/m2 [20lb] paper. This cleaning cycle varies according to the type of papers scanned and how frequently the scanner is used and cleaned.

ATTENTION Use only the specified consumables.

■Pad

To remove

Pad

To install

AP-5