Fujitsu M4000/M5000 Attaching End Caps to the Rails

Attaching End Caps to the Rails

After securing the cable management arm (CMA) to the SPARC Enterprise

M4000/M5000 server, attach the provided end caps to the rails.

1.Secure the CMA to the server.

Refer to the Equipment Rack Mounting Guide for information on installing the CMA to the server.

2.Attach the end caps onto the slide rails.

For the SPARC Enterprise M4000 server, an end cap is attached to both the right and left rear rails (FIGURE 1).

For the SPARC Enterprise M5000 server, two end caps are attached to the rails on which the CMA is not attached (FIGURE 2).

Note – If the CMA is not used, attach all end caps to the rails of the server. The SPARC Enterprise M4000 server uses two end caps. The SPARC Enterprise M5000 server uses four end caps.

FIGURE 1 Installing End Caps on the SPARC Enterprise M4000 Slide Rails

SPARC Enterprise M4000/M5000 Servers Product Notes 11