FIGURE 2 Installing End Caps on the Left Rear of the SPARC Enterprise M5000 Slide Rails
3.Connect the power cables to the rear of the server and secure them with the cable retention clamps.
Caution – Do not connect the power cables to a power source at this time.
4.Run the power cables beneath the CMA and secure them in place with tie wraps.
The power cables and infiniband cables should hang loosely in a service loop behind the server or the CMA might not be able to fully retract.
Note – If additional attachment points are required to route the cables, install the optional bracket kit.
12 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1041 • July 2007