4.Twist the cage nuts onto the screws from behind the rack ears.
The flat edges of the cage nuts should be aligned with the rack post to prevent the server from scraping against it.
FIGURE 4 Installing the Bracket Kit in a rack 1000
5.Insert velcro strips in the desired slots of the bracket to hold back cables.
Built‐in cut‐outs along the sides of the equipment rack can also be used to insert velcro strips to hold back cables, as desired.
6.Slide the server into the equipment rack.
7.Replace the rack stabilizer to its original position.
SPARC Enterprise M4000/M5000 Servers Product Notes 15