MB15F74UV
■ABSOLUTE MAXIMUM RATINGS
Parameter | Symbol |
| Rating | Unit | ||
|
|
| ||||
Min |
| Max | ||||
|
|
|
|
| ||
|
|
|
|
|
| |
Power supply voltage | VCC | −0.5 |
| 4.0 | V | |
|
|
|
|
|
| |
Input voltage | VI | −0.5 |
| VCC + 0.5 | V | |
|
|
|
|
|
|
|
Output voltage | LD/fout | VO | GND |
| VCC | V |
|
|
|
|
|
| |
DoIF, DoRF | VDO | GND |
| VCC | V | |
|
| |||||
|
|
|
|
|
|
|
Storage temperature | Tstg | −55 |
| +125 | °C | |
|
|
|
|
|
|
|
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■RECOMMENDED OPERATING CONDITIONS
Parameter | Symbol |
| Value |
| Unit | Remarks | |
|
|
| |||||
Min | Typ | Max | |||||
|
|
|
| ||||
|
|
|
|
|
|
| |
Power supply voltage | VCC | 2.7 | 3.0 | 3.6 | V | VCCRF = VCCIF | |
|
|
|
|
|
|
| |
Input voltage | VI | GND | | VCC | V |
| |
|
|
|
|
|
|
| |
Operating temperature | Ta | −40 | | +85 | °C |
| |
|
|
|
|
|
|
|
Note : • VCCRF and VCCIF must supply equal voltage.
Even if either
It is recommended that the
•Although this device contains an
•When storing and transporting the device, put it in a conductive case.
•Before handling the device, confirm the (jigs and) tools to be used have been uncharged (grounded) as well as yourself. Use a conductive sheet on working bench.
•Before fitting the device into or removing it from the socket, turn the power supply off.
•When handling (such as transporting) the device mounted board, protect the leads with a conductive sheet.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device’s electrical characteristics are warranted when the device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.
5