Fujitsu MPE3XXXAT manual Tables

TABLES

		page
1.1	Specifications	1	- 4
1.2	Model names and product numbers	1	- 5
1.3	Current and power dissipation	1	- 6
1.4	Environmental specifications	1	- 8
1.5	Acoustic noise specification	1	- 8
1.6	Shock and vibration specification	1	- 9
3.1	Surface temperature measurement points and standard values	3	- 5
3.2	Cable connector specifications	3	- 8
4.1	Self-calibration execution timechart	4	- 10
4.2	Transfer rate of each zone	4	- 13
5.1	Interface signals	5	- 2
5.2	Signal assignment on the interface connector	5	- 3
5.3	I/O registers	5	- 7
5.4	Command code and parameters	5	- 14
5.5	Information to be read by IDENTIFY DEVICE command	5	- 30
5.6	Features register values and settable modes	5	- 35
5.7	Diagnostic code	5 - 39
5.8	Features Register values (subcommands) and functions	5	- 49
5.9	Format of device attribute value data	5	- 51
5.10	Format of insurance failure threshold value data	5	- 52
5.11	Contents of security password	5	- 56
5.12	Contents of SECURITY SET PASSWORD data	5	- 61

5.13Relationship between combination of Identifier and Security level,

	and operation of the lock function	5	- 61
5.14	Command code and parameters	5	- 66
5.15	Recommended series termination for Ultra DMA	5	- 84
5.16	Ultra DMA data burst timing requirements	5	- 88
6.1	Default parameters	6	- 6

C141-E077-01EN xiii