10)If the host has not placed the result of its CRC calculation on DD (15:0) since first driving DD (15:0) during (9), the host shall place the result of its CRC calculation on DD (15:0) (see 5.5.5).

11)The host shall negate DMACK- no sooner than tMLI after the device has asserted DSTROBE and negated DMARQ and the host has asserted STOP and negated HDMARDY-, and no sooner than tDVS after the host places the result of its CRC calculation on DD (15:0).

12)The device shall latch the host's CRC data from DD (15:0) on the negating edge of DMACK-.

13)The device shall compare the CRC data received from the host with the results of its own CRC calculation. If a miscompare error occurs during one or more Ultra DMA burst for any one command, at the end of the command, the device shall report the first error that occurred (see 5.5.5).

14)The device shall release DSTROBE within tIORDYZ after the host negates DMACK-.

15)The host shall neither negate STOP nor assert HDMARDY- until at least tACK after the host has negated DMACK-.

16)The host shall not assert DIOR-, CS0-, CS1-, DA2, DA1, or DA0 until at least tACK after negating DMACK.

5.5.4Ultra DMA data out commands

5.5.4.1Initiating an Ultra DMA data out burst

The following steps shall occur in the order they are listed unless otherwise specifically allowed (see 5.6.3.7 and 5.6.3.2 for specific timing requirements):

1)The host shall keep DMACK- in the negated state before an Ultra DMA burst is initiated.

2)The device shall assert DMARQ to initiate an Ultra DMA burst.

3)Steps (3), (4), and (5) may occur in any order or at the same time. The host shall assert STOP.

4)The host shall assert HSTROBE.

5)The host shall negate CS0-, CS1-, DA2, DA1, and DA0. The host shall keep CS0-, CS1-, DA2, DA1, and DA0 negated until after negating DMACK- at the end of the burst.

6)Steps (3), (4), and (5) shall have occurred at least tACK before the host asserts DMACK-. The host shall keep DMACK- asserted until the end of an Ultra DMA burst.

7)The device may negate DDMARDY- tZIORDY after the host has asserted DMACK-. Once the device has negated DDMARDY-, the device shall not release DDMARDY- until after the host has negated DMACK- at the end of an Ultra DMA burst.

8)The host shall negate STOP within tENV after asserting DMACK-. The host shall not assert STOP until after the first negation of HSTROBE.

C141-E077-01EN

5 - 79

Page 146
Image 146
Fujitsu MPE3XXXAT manual

MPE3XXXAT specifications

The Fujitsu MPE3XXXAT series is a robust line of hard disk drives (HDDs) known for their reliability, performance, and advanced technology. Designed primarily for enterprise storage solutions, these drives cater to high-demand environments such as data centers, servers, and workstations. With capacities ranging from hundreds of gigabytes to several terabytes, the MPE3XXXAT series offers scalable storage options to accommodate a variety of applications.

One of the standout features of the MPE3XXXAT series is its high rotational speed. With most models operating at 7200 RPM, these drives ensure faster data access and improved read/write performance. This speed makes them ideal for applications requiring quick data retrieval, such as database management and data-intensive workloads. Furthermore, the series utilizes a Serial ATA (SATA) interface, which facilitates seamless connectivity and compatibility with a wide range of systems.

The Fujitsu MPE3XXXAT series is built with advanced technologies that enhance durability and longevity. Notably, the drives incorporate advanced error correction algorithms and vibration resistance features, which are crucial for maintaining data integrity over time. This is particularly important in multi-drive environments where vibrations from one drive can affect the performance of others. The drives are also designed with low power consumption in mind, contributing to energy savings without compromising performance.

In terms of data security, the MPE3XXXAT series supports various security features that protect against unauthorized access. These include ATA security features that enable password protection and robust encryption to safeguard sensitive information from potential breaches. This aspect is particularly significant for enterprises that handle confidential data and require stringent security measures.

The operational temperature range of the MPE3XXXAT drives is optimized for demanding environments, allowing them to function effectively in a variety of conditions. Their reliability is backed by an impressive Mean Time Between Failures (MTBF), which signifies their resilience and the manufacturer's commitment to quality.

Overall, the Fujitsu MPE3XXXAT series stands out as a reliable choice for enterprise storage needs. With its blend of high speed, capacity, durability, and security features, it addresses the challenges faced by modern data centers and businesses that require efficient data management solutions. Whether for backup, archival, or active data storage, the MPE3XXXAT series is designed to deliver consistent performance and peace of mind for users.