Fujitsu MPE3XXXAT manual Information to be read by Identify Device command 2, ‘3FFF’

Table 5.5 Information to be read by IDENTIFY DEVICE command (2 of 4)

	*1	Word 0: General configuration
		Bit 15: 0 = ATA device						0
		Bit 14-8: Vendor specific						0
		Bit 7: 1	= Removable media device					0
		Bit 6: 1	= not removable controller and/or device					1
		Bit 5-1: Vendor specific						0
		Bit 0: Reserved						0
	*2 Number of Cylinders, *3 Number of Heads,
	*11	Total number of user addressable sectors (LBA mode only.)
	MPE3064AT			MPE3102AT	MPE3136AT	MPE3170AT	MPE3204AT	MPE3273AT
*2	X‘3462’					X‘3FFF’
*3	X‘0F’					X‘10’
*11	X‘00C15DC2’			X‘01316CDC’	X‘01973C40’	X‘01FD0AC4’	X‘0262D9B8’	X‘032E7960’

*4 Word 10-19: Serial number; ASCII code (20 characters, right-justified)

*5 Word 23-26: Firmware revision; ASCII code (8 characters, Left-justified)

*6 Word		27-46: Model number;
	ASCII code (40 characters, Left-justified), remainder filled with blank code (X'20')
	One of the following model numbers;
	MPE3064AT, MPE3102AT, MPE3136AT, MPE3170AT, MPE3204AT, MPE3273AT
*7	Word 49: Capabilities
	Bit 15-14: Reserved
	Bit 13:		Standby timer value 0 = Standby timer values shall be managed by the device
	Bit 12:		Reserved
	Bit 11:		IORDY support	1=Supported
	Bit 10:		IORDY inhibition	0=Disable inhibition
	Bit 9:		LBA support	1=Supported
	Bit 8:		DMA support	1=Supported
	Bit 7-0: Vendor specific
*8	Word 51: PIO data transfer mode
	Bit 15-8: PIO data transfer mode				X'02'=PIO mode 2
	Bit 7-0: Vendor specific
*9	Word 53: Enable/disable setting of word 54-58 ,64-70 and 88
	Bit 15-3: Reserved
	Bit 2:		Enable/disable setting of word 88			1=Enable
	Bit 1:		Enable/disable setting of word 64-70			1=Enable
	Bit 0:		Enable/disable setting of word 54-58			1=Enable

C141-E077-01EN 5 - 31