•Specified string is too long.
Cause: | The specified string is too long. Up to 128 |
| to 64 |
User response: | User response: Reduce the number of characters in the string so that |
| they do not exceed 128 |
•Cannot specify next words for filename. \:;?”<> .
Cause: | The specified filename contains one or more of the following |
| characters: \:;?”<> . |
User response: | Enter a file name that does not contain the above characters. Then, |
| make the settings again. |
•The image scanner not found.
•An abnormality has occurred during communication. Make sure that the power is on, and that the cable is firmly connected.
•Communication failed. Make sure that the power is on, the cable is firmly connected, and the scanner is not used by another application.
•An abnormality has occurred during communication.
Cause: | Possible causes include the following: an image scanner that is not |
| supported by this driver has been connected, no image scanner has |
| been connected, or the cable is not connected. |
| The scanner is used by other application. |
| (This Driver can’t be used at the same time with more than one |
| application.) |
User response: | Check the connection of the image scanner. |
| Check that the scanner is not used by other application. |
| (In the case of Windows®XP, [Switch User] lets another user log on |
| while your programs and files remain open. Therefore, when you log |
| on with [Switch User], it has the possibility that another user have |
| already used the driver. |
•The specified image scanner is being used.
Cause: | The image scanner may be already in use by another application, or |
| the TWAIN driver may have been started twice. |
User response: | After all applications are terminated, restart the image scanner for |
| scanning. |
•Selected scanner is used by other application or not connected.
Cause: | 1. The scanner may be OFF or not connected. |
| 2. The scanner may be already in use by other application or the |
| “Scanner and Camera” in [Control Panel]. |
104