When checking this check box, scanning speed becomes faster, but image quality is slightly deteriorated.
Check this check box, when giving priority to scanning speed over image quality.
♦Scanner Operation Panel − Enable Scanner Panel
This is to specify whether the operator panel is enabled or not. If this is checked, button operation on the operator panel becomes effective. (Note that the operator panel is enabled only during the driver is activating.)
−Enable Scanner Dial
Specifies whether the value indicated by the density dial on the scanner is reflected on scanning or not.
This setting is valid when both “Enable Scanner Panel” and this checkbox are checked. With this density dial, the density can be set by five levels.
If moving the density dial to the UP direction, the density changes [Normal] >>[Darker scanning]>>[Dark scanning]. If moving the density dial to the Down direction, the density changes [Normal]>>[Lighter scanning]>>[Light scanning]. If the dial is in the center, the scanning density is [Normal].
−Enable [Duplex] button
This specifies whether the [Duplex] button (to switch simplex and duplex) on the scanner operator panel is enabled.
And, it distinguishes whether to scan from the ADF, or from the Flat Bed (FB), and changes automatically.
If this box is checked,
when a document is on the ADF, scanning is started from the ADF. And when no document is on the ADF, scanning is started from the FB.
Scanning changes [Simplex] >> [Duplex]>> [Simplex] each time the [Duplex] button is pressed.
−ADF/FB Automatic change
It distinguishes whether to scan from the ADF, or from the Flat Bed (FB), and changes automatically.
When a document is on the ADF, scanning is started from the ADF. And when no document is on the ADF, scanning is started from the FB.
50