Post-Imprinter(Printing after scanning, and on the back side of documents) Prints on documents using the imprinter installed in rear part of the scanner.

In this case, it prints on the back side of documents after scanning. Therefore, the printing is not included in a scanning result.

*[Pre-Imprinter] and [Post-Imprinter] cannot be used at the same time.

♦Y Offset (Printing)

Specifies Y Offset from the edge of the original for the placement of printing. See "Relevant Image Scanner Specification" in the Appendix because the standard value specified here depends on the device.

♦Direction (Printing)

Specifies the printing direction of endorsement strings. When printing from the head of strings against to the direction of scanning, designate “Top to Bottom”. And when printing from the tail of strings against to the direction of scanning, designate “Bottom to Top” However, see the “Relevant Image Scanner Specification” described in the Appendix since the available settings depend on the device.

♦Font (Printing)

Specifies the type of character from the followings.

Horizontal

:

Printing direction

Vertical:Horizontal-Narrow :

Available settings vary depending on your scanner. Refer to “Relevant Image Scanner Specification” in the Appendix.

♦Bold

The imprinter string is outputted with bold font.

Available settings vary depending on your scanner. Refer to “Relevant Image Scanner Specification” in the Appendix.

44